SUGA U48AU Carbon Arc Weathering Test Chamber
Get a quote：
Whats/App: +86 181 0160 0864
The SUGA U48AU Carbon Arc Weathering Test Chamber is a globally recognized instrument designed for high-precision accelerated lightfastness and weathering testing. By utilizing an enclosed carbon arc lamp as its primary light source, this chamber replicates the ultraviolet and visible spectrum of sunlight to evaluate how materials degrade over time. It allows you to simulate the effects of prolonged solar exposure on various products—ranging from textiles to electronics—ensuring that your materials meet international durability and colorfastness requirements before they reach the market.
Applications
The SUGA U48AU Carbon Arc Weathering Test Chamber is a globally recognized instrument for accelerated sunlight colorfastness testing. It evaluates the light-induced aging of various materials and products, serving applications in textile fibers, building materials, notebooks, and common office supplies. The chamber complies with multiple sunlight colorfastness testing standards.
Standards
ASTM G153-13 Standard Practice for Testing Nonmetallic Materials Using a Closed Carbon Arc Lamp
ASTM D3980 Practice for Interlaboratory Testing of Paints and Related Materials
ASTM G23 Testing Nonmetallic Materials Using Carbon Arc Exposure Apparatus (With and Without Water)
ASTM G114 Terminology Related to Natural and Artificial Weathering Tests for Nonmetallic Materials
ASTM G151 Laboratory Light Source Acceleration Test Apparatus for Nonmetallic Materials
ASTM G152 Open Carbon Arc Exposure Method for Nonmetallic Materials
ISO 4892-3 Plastics - Laboratory Light Source Test Methods
ISO 4892-1 Plastics - Laboratory Light Source Test Methods, Part 1: General Guidelines
ISO 4892-4 Plastics - Laboratory light source test methods - Part 4: Open carbon arc lamp
JIS A1415 Test methods for accelerated exposure aging of plastic building materials
JIS D0205 Test methods for weather resistance of automotive parts
JIS L0842-2004 Test methods for lightfastness to staining under enclosed carbon arc lamp
JIS L0891-2007 Test Methods for Accelerated Weathering Colorfastness Using Xenon Arc Lamp or Sunlight-Type Carbon Arc Lamp
JIS K7102 Test Method for Colorfastness of Plastics to Carbon Arc Lamp Irradiation
JIS B7751 Sunlight Carbon Arc Lamp Type Light Resistance Tester and Weathering Tester (Enclosed Carbon Arc Lamp)
NES M0135 Weathering and Light Resistance Testing of Synthetic Resin Parts
NES M0141 Test Methods for Coated Synthetic Resins
Features
Light Source—Long-life ultraviolet carbon rod emitting UV light at 388nm wavelength, capable of continuous operation for 48 hours.
Control System—Equipped with a humidity generator and continuous airflow delivery for high-precision temperature and humidity control.
Automatic Air Control System—Regulates air circulation within the mixing chamber and environmental air.
SUGA U48 and U48AU models are available to meet diverse user requirements.
Parameters
| Item | Specifications |
|---|---|
| Light Source | Carbon Arc Lamp |
| Continuous Operation Time of Light Source | 48 hours |
| Discharge Voltage & Current | 135V±10V, 16A±2A |
| Temperature Range | 63°C±3°C |
| Humidity Range | 35% RH to 50% RH±5% RH |
| Humidity Control | Atomizer |
| Temperature Cycle | Air circulation regulated by air control valve |
| Test Samples | Maximum capacity: 108 piecesSample size: 65mm×55mm, 1mm thickness |
| Power Supply | Single-phase, 200V, 41A |
| Dimensions (L×W×H) | 104cm × 95cm × 205cm |
| Weight | 354kg |
Accessories
Ultraviolet Carbon Rods: Specialized electrodes designed for 48-hour continuous discharge.
Specimen Holders: Stainless steel clips designed for standard $65text{mm} times 55text{mm}$ samples.
Black Panel Thermometer (BPT): For monitoring the surface temperature of the specimens.
Glass Filter Globes: High-transparency globes to protect the samples from combustion byproducts while transmitting the required UV spectrum.
Humidifier Wick/Atomizer: Components for the humidity generation system.
Test Procedures
1. Preparation of Samples
Measure and cut your test materials to the standard $65text{mm} times 55text{mm}$ size. Mount them securely into the specimen holders, ensuring the side to be tested is facing inward toward the light source.
2. Rod and Filter Installation
Install a new set of carbon rods into the lamp assembly. Clean the glass globe to ensure maximum UV transmission and place it over the arc assembly. Check the gap between the rods to ensure reliable ignition.
3. Parameter Configuration
Access the control panel to set the Black Panel Temperature (BPT) to the standard $63^{circ}text{C}$ and configure the humidity levels. Set the timer for the required test duration (up to 48 hours for a single rod cycle).
4. Initiating the Test
Start the air circulation and humidity systems first, then ignite the carbon arc. The specimen rack will begin to rotate around the light source to ensure that every sample receives an identical dose of radiation.
5. Final Assessment
Once the test cycle is complete, remove the samples. Compare the exposed specimens against an unexposed control sample or a standard Gray Scale to evaluate the degree of color change, fading, or physical degradation.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Bag Plastic Buckle Durability Tester - Standard | Product Introduction: It is mainly used to test the service life of plastic plug-ins in luggage accessories. Technical standard: QBT 5247-2018 ... |
 |
Xenon Test Chamber/weather ometer | IntroductionWeather-Ometer and Fade-Ometer tester adopts water-cooled xenon lamp. This instrument using argon arc lamp simulation control ideal nat... |
 |
Surface Flame Spread Test Apparatus | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Surface Flame Spread Test Apparatus is a high-precision instrument designed fo... |
 |
Artificial turf wear tester EN 15330 | Standard FIFA Quality Programme: Exceeds 2015/2016 handbook requirements for artificial turf abrasion resistance testing. EN 15330-1: European st... |
 |
Suture Needle Cutting Force Tester YY 0166 | The Cutting Force Tester for Suture Needles is a precision instrument specifically used to detect the force required by medical suture needles duri... |
Похожие товары
 |
MMA-120 Handheld Arc Welder | Продавец: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | Продавец: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | Продавец: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | Продавец: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | Продавец: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
