.

Chemical Protective Robotic Manikin | ASTM ISO Testing Machine

Get a quote:

Whats/App: +86 185 0176 3615

Web: qinsun-lab.com

The mannequin is mounted in an external drive frame. The foot drive frame supports external actuators and provides 10 axes of motion. Two lightweight actuators are installed inside the mannequin to generate sympathetic head movement. The system can perform a test sequence of up to six hours in a chemically harsh environment, consisting of any combination of 10 pre-programmed actions.

Also included in the mannequin system is an interchangeable carbon composite upper body head form, designed as a portable stand-alone system for smaller test chambers and temporary environmental analysis tents, which has the same exact dimensions as the mannequin and can be interchanged directly in the drive frame. This upper body form of the head is supported by the base of the head rather than the face. The system provides users with fully computer-controlled head joints that can be combined with arm movements driven by the frame.

Both the upper body and the mannequin have soft, chemical-resistant elastomer skin that covers the entire head, neck, wrists, and waist of the mannequin. This material was developed by i-bodi specifically for this application. In addition, according to the test requirements, low-cost, high-flexibility disposable silicone leather has been developed as an alternative. The house dosimeter holder in the form of a mannequin and upper body head collects the necessary data to evaluate the integrity of the test garment.

Application

This equipment is used for the following applications:

(1) Performance evaluation of chemical and biological protective suits

(2) Dynamic integrity testing of gas-tight and liquid-tight protective garments

(3) Sealing performance assessment at interfaces such as head–neck, wrists, and waist

(4) Testing of protective headgear and integrated respirator systems

(5) Research on material durability and degradation under mechanical motion

(6) Certification, verification, and compliance testing in controlled chambers or test tents

Standards

The system is designed to meet or reference the following standards and test specifications:

(1) ISO 13982-1 — Protective clothing against solid particulates

(2) ISO 16602 — Protective clothing for chemical exposure

(3) ISO 17491 — Chemical protective clothing test methods

(4) EN 943-1 / EN 943-2 — Gas-tight chemical protective suits

(5) ASTM F739 — Resistance of protective clothing materials to permeation

(6) ASTM F1001 — Chemical resistance evaluation of protective clothing

(7) NATO AEP-54 — Evaluation of chemical and biological protective equipment

(8) YY/T 0316-2016 — Medical protective equipment quality management reference

(9) GB/Z 42217-2022 — Chemical protective equipment test guidance

(10) GB/T 16294-2010 — Protective clothing performance testing

Motion System

ItemTechnical Parameter
Number of motion axes 10 axes
Drive method External motor-driven frame
Head motion Internal lightweight actuators, synchronized
Motion mode Programmable composite motion sequences
Continuous operation time ≤ 6 h

Support and Installation

ItemTechnical Parameter
Support points Hands, face (manikin), feet
Foot fixation Strapped foot boards
Head form support Supported at head base
Interchangeability Full manikin and head form interchangeable in same drive frame


Send product request

To: Standard Groups
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Color fastness tester for ironing sublimation
Color fastness tester for ironing sublimation Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com G247B Color fastness tester for ironing sublimation, It is widely used for the hot...
Water-filled dummy
Water-filled dummy Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Water-filled Dummy (Ballast Weight Dummy) is a highly practical simulation too...
Helmet UV Pretreatment Box Tester
Helmet UV Pretreatment Box Tester Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Helmet UV Pretreatment Box is designed to simulate ultraviolet (UV) exposure o...
New Energy Battery Air Tightness Leak Tester
New Energy Battery Air Tightness Leak Tester Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com This equipment is used for air tightness and sealing performance testing of new en...
Automatic Long Filament Curl Shrinkage Tester - lab instrument
Automatic Long Filament Curl Shrinkage Tester - lab instrument Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com Automatic Long Filament Curl Shrinkage Tester The ...
All supplier products

Same products

Laser Chuck
Laser Chuck Seller: Drake precision technology (changzhou) Co.,Ltd. Laser Chuck Introduce foreign advanced technology and management concept, High precision pro...
Power Pallet Jack For Sale
Power Pallet Jack For Sale Seller: Jinan Hulk Machinery Co., Ltd Power Pallet Jack For Sale Electric Pallet Truck For Sale As a supplier of power pallet jac...
Multi Directional Forklift For Sale
Multi Directional Forklift For Sale Seller: Jinan Hulk Machinery Co., Ltd Multi Directional Forklift For Sale Multi Directional Forklift For Sale As a supplier of mu...
Narrow Aisle Forklift For Sale
Narrow Aisle Forklift For Sale Seller: Jinan Hulk Machinery Co., Ltd Narrow Aisle Forklift For Sale Narrow Aisle Forklift For Sale As a supplier of , we provide...
Electric Order Picker Supplier
Electric Order Picker Supplier Seller: Jinan Hulk Machinery Co., Ltd Electric Order Picker Supplier Electric Order Picker Supplier As an supplier, we offer a co...