.

Chemical Protective Robotic Manikin | ASTM ISO Testing Machine

Get a quote:

Whats/App: +86 185 0176 3615

Web: qinsun-lab.com

The mannequin is mounted in an external drive frame. The foot drive frame supports external actuators and provides 10 axes of motion. Two lightweight actuators are installed inside the mannequin to generate sympathetic head movement. The system can perform a test sequence of up to six hours in a chemically harsh environment, consisting of any combination of 10 pre-programmed actions.

Also included in the mannequin system is an interchangeable carbon composite upper body head form, designed as a portable stand-alone system for smaller test chambers and temporary environmental analysis tents, which has the same exact dimensions as the mannequin and can be interchanged directly in the drive frame. This upper body form of the head is supported by the base of the head rather than the face. The system provides users with fully computer-controlled head joints that can be combined with arm movements driven by the frame.

Both the upper body and the mannequin have soft, chemical-resistant elastomer skin that covers the entire head, neck, wrists, and waist of the mannequin. This material was developed by i-bodi specifically for this application. In addition, according to the test requirements, low-cost, high-flexibility disposable silicone leather has been developed as an alternative. The house dosimeter holder in the form of a mannequin and upper body head collects the necessary data to evaluate the integrity of the test garment.

Application

This equipment is used for the following applications:

(1) Performance evaluation of chemical and biological protective suits

(2) Dynamic integrity testing of gas-tight and liquid-tight protective garments

(3) Sealing performance assessment at interfaces such as head–neck, wrists, and waist

(4) Testing of protective headgear and integrated respirator systems

(5) Research on material durability and degradation under mechanical motion

(6) Certification, verification, and compliance testing in controlled chambers or test tents

Standards

The system is designed to meet or reference the following standards and test specifications:

(1) ISO 13982-1 — Protective clothing against solid particulates

(2) ISO 16602 — Protective clothing for chemical exposure

(3) ISO 17491 — Chemical protective clothing test methods

(4) EN 943-1 / EN 943-2 — Gas-tight chemical protective suits

(5) ASTM F739 — Resistance of protective clothing materials to permeation

(6) ASTM F1001 — Chemical resistance evaluation of protective clothing

(7) NATO AEP-54 — Evaluation of chemical and biological protective equipment

(8) YY/T 0316-2016 — Medical protective equipment quality management reference

(9) GB/Z 42217-2022 — Chemical protective equipment test guidance

(10) GB/T 16294-2010 — Protective clothing performance testing

Motion System

ItemTechnical Parameter
Number of motion axes 10 axes
Drive method External motor-driven frame
Head motion Internal lightweight actuators, synchronized
Motion mode Programmable composite motion sequences
Continuous operation time ≤ 6 h

Support and Installation

ItemTechnical Parameter
Support points Hands, face (manikin), feet
Foot fixation Strapped foot boards
Head form support Supported at head base
Interchangeability Full manikin and head form interchangeable in same drive frame


在线联系供应商

至: Standard Groups
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Air-cooled Xenon Lamp Aging Tester| Testing Equipment
Air-cooled Xenon Lamp Aging Tester| Testing Equipment Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com What is A Light Fastness Tester? A Light Fastness Tester, or Xenon Tester, Accele...
Comfortable Thermal Manikin
Comfortable Thermal Manikin Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The thermal manikin simulates real physiological heat exchange with the environmen...
Yarn Twist Tester
Yarn Twist Tester Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Yarn Twist Tester is a precision instrument designed to measure the twist of v...
 Filter Media Tester G508 (Without Vertical Duct)
Filter Media Tester G508 (Without Vertical Duct) Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Filter Media Filtration Performance Test Bench G508 is designed to evaluate th...
Nonwovens liquid loss tester - lab instrument
Nonwovens liquid loss tester - lab instrument Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com This fabric friction tester can measure the static ...
供应产品

Same products

HDPE高速水冷双壁波纹管生产线
HDPE高速水冷双壁波纹管生产线 卖方: Shandong HUASU Plastic Technology Co.,Ltd. 机头模具采用双流道结构、氮化磨光处理机头,偏壁调整方便快捷,保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构,冷却充分,多点分布真空系统,效率更高,生产速度更快。 双层在线扩口功...
PanEVAP & MVR system
PanEVAP & MVR system 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
PanGAP wide gap welded plate heat exchanger
PanGAP wide gap welded plate heat exchanger 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
PanBloc welded plate heat exchanger
PanBloc welded plate heat exchanger 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
PanBox welded plate heat exchanger
PanBox welded plate heat exchanger 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...