Nonwovens liquid loss tester
Get a quote：
Whats/App: +86 181 0160 0864
The Nonwovens Liquid Loss Tester is a precision instrument designed to evaluate the liquid penetration, slip, and loss performance of nonwoven fabric materials. It features a built-in liquid loss platform and sample fixture, enabling standardized testing of absorption and liquid retention characteristics, suitable for both R&D and production quality control.
Application
The tester is widely applicable across multiple industries:
(1) Hygiene products: diapers, adult incontinence products, sanitary pads
(2) Medical textiles: wound dressings, surgical gowns, masks
(3) Filtration materials: air filters, water filters, industrial wipes
(4) Food packaging: absorbent pads, protective liners
(5) Industrial absorbents: oil-absorbing mats, chemical spill pads
(6) Textiles and nonwoven R&D: evaluating new materials, coatings, and treatments
(7) Quality control laboratories: production batch testing, compliance verification
(8) Building and construction: moisture barrier textiles, insulation fabrics
(9) Automotive: cabin filters, absorbent mats, soundproofing layers
(10) Environmental engineering: spill control fabrics, eco-friendly absorbents
Standards
EDANA 152.0-99 (Absorbent Hygiene Products – Liquid Loss Test)
ISO 9073-11 (Textiles – Nonwovens – Determination of Liquid Loss)
Optional references for hygiene products: ASTM F2331. EN 13726-1
Features
(1) Equipped with standardized liquid loss platform and sample fixture to meet test requirements
(2) Integrated dosing device delivers 25 mL of test solution continuously within 4 ± 0.1 seconds
(3) Manual or automatic liquid dispensing, with digital display for accurate timing
(4) Optional weighing system to measure liquid absorption quantitatively
(5) Adjustable slope for controlled liquid flow over the sample
(6) High precision and repeatability for reliable quality control results
Test Principle
A standard absorbent medium is placed beneath the nonwoven sample, positioned on a sloping pad. A specified amount of test liquid is applied to the sample. The liquid penetrates the nonwoven and is absorbed by the medium. By measuring the mass of the absorbent medium before and after testing, the liquid loss performance of the nonwoven sample is calculated.
Technical Parameters
| Parameter | Specification |
|---|---|
| Flow Control Range | 6.10–6.41 mL/s |
| Slope Angle | 25° |
| Slip and Loss Length | 250 ± 0.2 mm |
| Timing | 60 s, ±0.1 s accuracy |
| Slip and Loss Weight | 30 g ± 0.01 g |
| Liquid Volume | 25 mL/test |
| Measurement Method | Gravimetric via absorbent medium |
Accessories
Standard sample fixture
Built-in dosing system
Optional weighing system
Digital display and timing module
Test Procedures / Maintenance
(1) Place the standard absorbent medium under the nonwoven sample.
(2) Mount the sample on the slope pad and secure with the fixture.
(3) Fill the dosing device with test liquid (e.g., artificial urine).
(4) Start the test: liquid is dispensed manually or automatically over 4 ± 0.1 s.
(5) Measure the mass of the absorbent medium before and after the test to calculate liquid loss.
(6) Clean the dosing system and sample fixture after each test to prevent residue buildup.
(7) Perform regular calibration checks for dosing volume and timing accuracy.
Send product request
Other supplier products
 |
Yellowing resistance test chamber / Yellowing Resistance Chamber | Applicable standards HG/T3986. ASTM D1748. etc. Scope of application Test method for determining the yellowing resistance of light and white pro... |
 |
Wyzenbeek or Oscillatory Abrasion Tester | Get a quote： Whats/App: +86 181 0160 0864 Wyzenbeek wear resistance tester, also known as Oscillatory wear resistance tester, is used to test the... |
 |
Automotive Wire Adhesion Tester | Get a quote： Whats/App: +86 181 0160 0864 The Automotive Wire Adhesion Tester is designed to evaluate the bonding strength of automotive wires an... |
 |
Bursting Strength Tester | Getaquote: Whats/App: +86 181 0160 0864 The G229P Pneumatic Fabric Bursting Strength Tester is used to measure the bursting strength and height o... |
 |
Rubber hose outer coating wear testing machine 丨 Rubber Hose Abrasion Tester | Product Introduction: Rubber hose outer coating Wear testing machine for hydraulic hoses and other similar types of hoses with fabric or steel wir... |
Same products
 |
MMA-120 Handheld Arc Welder | Seller: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
