EN 60312 Vacuum Cleaner Filtration Test Machine
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
For emission tests the suction air is prepared with a dust concentration of 550 mg/m³ and passed directly into the hose of the vac.
For dust retaining tests the suction air is prepared with a dust concentration of 100 mg/m³ in the inlet channel (mixingtube) described in the standard.
Applications
Determination ofparticleemission of the vacuum cleaner into the exhaust air
Determination of the dust retaining capacity of the vacuum cleaner
Standard
The Vacuum Cleaner Filters is designed for tests on vacuum cleaners (vac) for household or small business use according to the standard EN 60312.
GB/T 38043-2019 Commercial Vacuum Cleaner Performance Test Methods
GB/T 4214.2-2020 Noise Measurement for Household Appliances – Vacuum Cleaner Requirements
EN 60312 Vacuum Cleaner Performance Test Standard
Commission Delegated Regulation (EU) No. 665/2013 Energy Label and Dust Re-Emission Requirements
Features
Manual control for service, calibration procedures and user defined tests
Automatic test procedures in accordance with standard EN 60312
Emission test with determination of the average result and determination of a confidence limit
Filtration efficiencytest with determination of a confidence limit
Dust-reemission tests according to Commission Delegated Regulation (EU) No. 665 / 2013; known as ‘Energy Label for Vacuum Cleaners’
Accessories
control Software VCTWin for Vacuum Cleaner Test Rig VCT 121
Technical data
| Parameter title | Unit | Value |
|---|---|---|
| test flow rate | m³/h | 18 ... 200 |
| power supply | - | 230 V AC; 50-60 Hz; 16 A |
| operating medium, gas/air | - | dry,particle-free compressed air |
| operating medium, gas/air - compressed air supply | bar | min. 5 (min. 5 m³/h) |
| dimensions (w × h × d) | mm | 2600 ×2500 × 850 |
| weight | kg | 350 |
Send product request
Other supplier products
 |
Full Vehicle Environmental Test Chamber Factory Direct Sale | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The chamber conforms to multiple national and international stan... |
 |
BSS 7303 Aircraft Material Oil Burner Seat Cushion Test System Manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com E-mail：info@standard-groups。com Parameters ItemSpecification Ove... |
 |
Shoelace anti-siphon tester丨Shoelace anti-siphon test mechine | |
 |
Electrical bushing flame retardant tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: The flame retardant test instrument for electrical bushing is used t... |
 |
Four - point Bending Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 0342-2022: Chinese standard specifying methods for determining bending stren... |
Same products
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
 |
PanPHE gasketed plate heat exchangers | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanPHE gasketed plate heat exchangersare designed with easy access for regular servicing and for ... |
