Respirator Fit Tester
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The Qinsun PortaCount Respirator Fit Tester assesses the overall integrity of masks by performing an aerosol leak test using the PortaCount particle detector. The instrument operates under controlled negative pressure and constant airflow, providing accurate quantitative fit measurements. Masks are tested on a full headform with an enhanced bladder seal system to simulate real-life usage, allowing the mask’s head harness to function naturally and ensuring more precise test results.
This system eliminates the guesswork and variability of qualitative fit tests, providing objective and repeatable evaluation of mask fit and protection performance.
Application
The PortaCount Respirator Fit Tester is suitable for fit and integrity testing across the following industries and products:
(1) Military and Defense: CBRN gas masks, full-face respirators — overall fit and protection factor assessment
(2) Occupational Safety: commercial respirators, industrial dust masks, half-face and full-face respirators — fit testing and leak detection
(3) Medical and Healthcare Industry: surgical masks, N95/FFP masks, medical respirators — quantitative fit evaluation
(4) Research and Development: development of new respirator models and harness designs, optimization of fit and seal
(5) Quality Control: production batch verification, ensuring proper mask fit for various models and sizes
(6) Third-Party Testing Laboratories: certification testing, evaluation of mask protection factor, exhalation valve and drink tube performance
The instrument is widely used for product development, R&D, production quality control, and laboratory fit testing.
Standards
The instrument complies with and can be applied to the following standards (including but not limited to):
(1) ISO 16975-3:2017 – Respiratory Protective Devices — Selection, Use, and Maintenance — Part 3: Fit Testing Procedures
Features
(1) Separate testing for overall mask integrity (Protection Factor), exhalation valve, and drink tube
(2) Integrated aerosol wand for pinpointing leak locations, enabling immediate evaluation and repair
(3) Full headform configuration allows the mask’s head harness to function naturally, simulating real-life use
(4) Single headform with enhanced bladder seal system provides a tight seal for most gas mask and full-face respirator types and sizes
(5) Easy-to-read display and intuitive step-by-step test sequence minimize operator training requirements
(6) Objective quantitative measurement eliminates the uncertainty of qualitative fit testing
Included Items
HEPA Filter Canister ×2
Drink Tube Sampling Hose
DT & EV Bypass Hose
Emery Oil (500 ml)
PortaCount Fit Tester Interface Cable (for Models 8030/8038 only)
MITA Computer Cable
USB to Serial Converter
MITA Communicator Software CD
Quick Start Guide
Self Check Components Reference Card
Send product request
Other supplier products
 |
Automotive Wire Combustion Tester | Get a quote： Whats/App: +86 181 0160 0864 The Automotive Wire Combustion Tester is designed to evaluate the flame resistance and burning performa... |
 |
Surgical Blade Sharpness Tester YY 0174 | Compliance Standards YY 0174 - 2019 Surgical Blades, etc. Main Uses - Quality Control in Medical Device Manufacturing: In medical device manufac... |
 |
SUGA S80 Carbon Arc Weathering Tester | Applicable Standards The SUGA S80 adheres to globally recognized standards, including: ISO, AATCC, ASTM(e.g., ASTM G152. ASTM D822 for coatings... |
 |
Vibration Table ISO 2247 | Standard ASTM D999: Vibration testing of shipping containers and packaged products. TAPPI T819: Corrugated box performance under simulated transp... |
 |
Catheter Power Injection Flow and Pressure Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Catheter Power Injection Flow and Pressure Tester is designed to evaluate the ... |
