.

Filter Testing Machine

It’s great significant forDynamic Filter Testerand filter media test system bench to optimize and develop filter materials, ensure quality assurance of the production process. Dust capacity and filtration efficiency are the most interesting properties of filter material properties, depending on the pressure difference between the upstream and downstream of the filter and the test particle size.

In order to test these properties, the Filter test bench bench tests the filter materials according to international standards. The entire test bench is compact and lightweight, and only requires additional single-phase power and compressed air during the test. It is suitable for the laboratory.

Air filtration material test benchStandards

1. YY0469-2004 Technical requirements for surgical mask

2. GB2626-2006 Respiratory protective equipment -- non-powered air-purifying particle respirator

3. EN1822-3: 1998 High efficiency particulate air filters (HEPA and ULPA) - Part3:Testing flat sheet filter media

Filter Testing Machine Features

Test the filter materials according to the standards (air filter EN779. air filters for passenger compartments ISO11155-1 ISO11057. VDI3926).

Develop and optimize filter materials.

Good quality assurance.

Smart design makes its application with greater scalability and extensibility.

The test bench can be operated and controlled by user-friendly PAFWin3.0 software.

Aerosols are available in a wide range (gas, dust and droplets).

The optimal combination of instruments makes it the most cost-effective.

Technical Parameters:

Items

Parameters

Air flow

0.5~65m3/h±1%

Differential pressure

10~2500Pa±0.1%

Cross section

176cm2(diameter 150mm)

Cylinder pressure

0.2~0.6MPa

Agitated time

50~150 ms

Optical particle counter

LAP322 particle size spectrometer, 0.2~40μm(0.2~5μm, 0.7~40μm), 128 channel(test concentration<104 /cm3)

Test aerosol

Dust (AC fine, AC coarse, soot, calcite, limestone).Droplets (DEHS, DOP, paraffin, emery 3004).Salts (sodium chloride solution, ammonium sulfate solution). PSL small ball.

Power

3×230 V, 16A


Send product request

To: Standard International Group (HK) Limited
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Schopper Abrasion Tester丨Abrasion Tester (SCHOPPER system)
Schopper Abrasion Tester丨Abrasion Tester (SCHOPPER system) Standards DIN 53863. Part 2: Abrasion test methods for textile fabrics (rotary abrasion test). GME Standard 60345 & GMW Standard 3283: Indust...
Carbon Black Content Tester / Carbon Black Content Apparatus
Carbon Black Content Tester / Carbon Black Content Apparatus Standard GB 13021-1991: Determination of carbon black content in polyethylene compounds. GB/T 2951.41-2008: Test method for carbon black and ash ...
SUGA S80 Carbon Arc Weathering Tester
SUGA S80 Carbon Arc Weathering Tester Applicable Standards The SUGA S80 adheres to globally recognized standards, including: ISO, AATCC, ASTM(e.g., ASTM G152. ASTM D822 for coatings...
Shoe Heel Impact Fatigue Tester / Shoe Heel Fatigue Tester
Shoe Heel Impact Fatigue Tester / Shoe Heel Fatigue Tester Meet the standard BS-5131 SATRA TM21. etc Main uses Heel impact fatigue testing machine is mainly used to test the continuous impact tolerance ...
Cork Puncture and Chip Detection Instrument
Cork Puncture and Chip Detection Instrument The rubber stopper puncture debris detector is a device specifically used to detect the number of debris generated during the puncture process and ...
All supplier products

Same products

Bottle Wall and Bottom Thickness Tester
Bottle Wall and Bottom Thickness Tester Seller: Standard International Group (HK) Limited The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha...
Pinhole Tester / Pinhole Testing Equipment
Pinhole Tester / Pinhole Testing Equipment Seller: Standard International Group (HK) Limited The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ...
Cork Puncture and Chip Detection Instrument
Cork Puncture and Chip Detection Instrument Seller: Standard International Group (HK) Limited The rubber stopper puncture debris detector is a device specifically used to detect the number of...
Aluminum Ointment Tube Toughness Tester
Aluminum Ointment Tube Toughness Tester Seller: Standard International Group (HK) Limited The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind...
Vacuum leak tester / Vacuum leak instrument
Vacuum leak tester / Vacuum leak instrument Seller: Standard International Group (HK) Limited Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott...