CE certified geosynthetic clogging tester
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
The method of gradient ratio is used to measure the permeability coefficient and permeability ratio of soil and geotextile system and its interface under no-pressure conditions, and the mud content of geotextile is measured to determine whether the geosynthetic material is used as a filter layer of some soil, and whether the blockage is not allowed.
Standard
ASTM D5101-2006:Standard Test Method for Measuring the Soil-Geotextile System Clogging Potential by the Gradient Ratio
JTG E50 T1145-2006:Test Method for Clogging of Geosynthetics - Gradient Ratio Method (as part of JTG E50-2006)
SL 235-2012:Specification for Test and Measurement of Geosynthetics
Features
Suitable for all kinds of soil and geotextile;
Floor type design, stable fuselage structure, not easy to deformation:
Plexiglass test chamber can visually observe the silting process of geotextiles:
The seal of the specimen holding device in the test cylinder is good to ensure the feasibility of the test.
The height of the test cylinder is reasonable, and a certain space is reserved above the soil sample to make the water flow uniform and stable.
Manual rotary hand wheel drive, water level regulation, efficient and smooth:
6 pressure gauges for easy pressure observation and high measurement accuracy:
Easy to install, easy to operate.
Parameters
Instrument type floor type
The inner diameter of the test cylinder is 100mm
The sample height is 100mm
Head difference adjustment range 0——1050mm
Head difference accuracy ±1mm
Support net aperture 6mm
Overall dimensions 450x400x980mm(LxWxH)
Weight 75kg
Accessoriess
Drain pipe.
Water inlet balance tank.
Water supply pipe.
Time-controlled smart meter.
Send product request
Other supplier products
 |
Salt Spray Test Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Salt Spray Tester is used to create and maintain the salt spray (fog) test environment,... |
 |
Bonding Strength Measuring Instrument | Whats/App: +86 156 1874 6768 Web: standard-groups.com The tack - holding tester, also known as the tack - holding property tester, tack - holding... |
 |
Solid Split-Type Weighted Dummy Manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Solid Split-Type Weighted Dummyis a premium, high-stability ballast syste... |
 |
ASTM D2061 Zipper Cycling Tester | Zipper Endurance Test Equipment Supplier | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features 1. The counter adopts LCD display, 0~ 999.999 continuous adjustable... |
 |
OEM Walk-in Climate Test Chamber Factory Direct | Temperature & Humidity Simulation Solutions | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 2423.1: Environmental testing methods for electrical and elec... |
