Drum and Reciprocating Friction and Wear Testing Machine for ASTM G133 Standard
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Drum and Reciprocating Friction and Wear Testing Machine is a dual-function tribological testing system designed to perform both linear reciprocating sliding tests and drum rotation wear tests. By combining conventional friction and wear measurement with rotating drum testing, the machine enables realistic simulation of actual operating conditions for rollers, drums, paper, and sheet materials, providing comprehensive evaluation of friction behavior and wear performance.
Standards
ASTM G133 (Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear)
ISO 7148 (Plain Bearings — Testing of Friction and Wear)
JIS K 7218 (Testing Methods for Plastic Tribological Properties)
JIS P 8139 (Determination of Friction and Wear Properties of Paper and Board)
Parameters
| Parameter | Specification |
|---|---|
| Table size | W 110 mm × L 400 mm |
| Stage travel speed / distance | 30–6000 mm/min / 1–100 mm |
| Operating modes | Single mode, repeat mode |
| Automatic reciprocation count | Max. 9.999.999 cycles |
| Y-axis positioning stage | ±10 mm (reciprocating mode) |
| Drum / roller diameter | Ø10–90 mm |
| Drum fixing method | Dedicated clamping fixtures (customizable by shape) |
| Drum rotation direction / speed | Forward & reverse / 50–500 rpm (custom speeds available) |
| Drum rotation counter | Accumulated up to 9.999.999 cycles |
| Timed automatic stop function | Available, up to 9.999.999 cycles |
| Friction measurement | X, Y, Z directions (Z for vertical load monitoring) |
| Measurement range | Max. 9.8 N for all three directions |
| Vertical load | 1–1000 g (balance arm + weights) |
| 0–10 mm load sensor pressing method (max. 9.8 N) | |
| Pivot vertical movement | 0–150 mm |
| Strain amplifier output | 0–9.8 N = 0–5 V DC analog output |
| Limiter function | Automatic stop at preset friction force in reciprocating mode |
| Measurement position: longitudinal center of sample (drum mode only) | |
| Data analysis (optional) | General friction analysis software for X, Y, Z channels |
Features
Dual-purpose design enables both reciprocating sliding tests and drum rotation tests in a single system
Two loading methods available: traditional weight loading and load-sensor pressing method for drum testing
Real-time monitoring of fluctuating pressing loads during rotation tests
Smooth transition between drum mode and reciprocating sliding mode
Automatic stop function based on preset cycle count or friction force simplifies wear testing
Multi-axis friction measurement provides comprehensive tribological data
Send product request
Other supplier products
 |
Laboratory Vehicle Cabin Air Filter Performance Testing Equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 32085.1 — Automotive Air Conditioning Filters, Part 1: Dust Filtratio... |
 |
Tibial Tray Fatigue Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 0810 (China): Specifies fatigue testing protocols for tibial trays in total ... |
 |
Carpet Pilling and Fuzzing Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Instrument Description This instrument is used to simulate the pilling and fuzzing phenome... |
 |
Constant Elongation Tensile Stress Tester ISO 13934 | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Usage Constant tensile stress meter is an instrument to determine the tensil... |
 |
Plastic Environmental Stress Crack Resistance Testing Machine ASTM D5397 | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1)ASTM D1693: Exclusively designed for bending beam and constant ... |
