Advanced Gas Jet Erosion Rig for Surface Durability Testing
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Gas Jet Erosion Rig is a laboratory testing system designed to evaluate erosion wear behavior of materials and coatings subjected to high-velocity particle-laden gas flow. You use this equipment to simulate solid particle impact erosion under controlled conditions by adjusting particle velocity, mass flow rate, impingement angle, and specimen orientation. It is suitable for standardized testing and comparative analysis of metals, ceramics, polymers, and coated surfaces.
Standards
You can conduct erosion tests in accordance with the following international standards:
(1) ASTM G76 – Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets
(2) DIN 50332 – Erosion Testing by Particle Jet Method
(3) ISO 20567-1 – Paints and Varnishes – Determination of Stone-Chip Resistance – Part 1
(4) ISO 20567-2 – Paints and Varnishes – Determination of Stone-Chip Resistance – Part 2
Parameters
| Parameter | Specification |
|---|---|
| Particle Nozzle | Inner diameter 4.7 mm, length 300 mm, stainless steel |
| Nozzle Height Adjustment | Adjustable nozzle-to-specimen distance |
| Specimen Holder | Tiltable, specimen size 50 × 50 mm |
| Particle Velocity (Standard Mode) | 25 – 80 m/s at 1.5 bar |
| Particle Velocity (Enhanced Mode) | Up to 120 m/s at 4 bar |
| Particle Mass Flow Rate | 0.2 – 2 g/min |
| Gas Heating | Optional, up to 100°C |
| Power Supply | 220/240 V, single phase, 50 Hz, 1.5 kW |
| Compressed Air (Standard Mode) | 1.5 bar, 3.5 cfm |
| Compressed Air (Enhanced Mode) | 4 bar |
| Installation Dimensions | 1000 × 1200 × 400 mm |
| Installation Type | Floor-standing |
Features
(1) Large-diameter nozzle design reduces localized drilling effects and is suitable for coating and bulk material testing.
(2) Low operating pressure improves operational safety and reduces system wear.
(3) Adjustable nozzle position and tiltable specimen holder allow precise control of impact angle.
(4) Stable particle mass flow control using a grooved rotating disc combined with Venturi feeding.
(5) Suitable for a wide range of test materials and particle types.
(6) Modular construction enables quick replacement of nozzle, specimen holder, and heating unit.
(7) Optional gas heating supports erosion testing under elevated temperature conditions.
(8) Robust enclosure improves operator safety and test repeatability.
Accessories
(1) Adjustable stainless steel nozzle assembly
(2) Tiltable specimen clamping fixture for 50 × 50 mm specimens
(3) Particle feeding system with grooved disc and Venturi injector
(4) Abrasive particles selected according to test requirements
(5) Optional gas flow heating unit
(6) Compressed air connection components
(7) Safety enclosure for particle containment
Send product request
Other supplier products
 |
Bone Plates Four-point Bending Fatigue Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 1503-2016: Chinese standard specifying test methods for bending fatigu... |
 |
Precision Metal Wire Wrap Tester ASTM International | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) GB/T 2976 – Wire Winding Test Method for Metal Materials... |
 |
Voltage Drop Tester for Automotive Wire Connectors | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Voltage Drop Tester for Automotive Wire Connectors is designed to measure the voltage d... |
 |
Expansion Tank Burst and Static Pressure Test Machine | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Expansion Tank Static Pressure Test Machine is a specialized system desig... |
 |
Helmets Vertical SpacingInfrared - positioning Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Purpose This measuring instrument is used to measure the vertical spacing and wearing heig... |
