Precision Rotary Vacuum Tribometer
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
The Vacuum Friction and Wear Tester supports or is applicable to the following international and industry standards:
NASA / SAE AMS 3150 (Vacuum friction and wear testing of aerospace materials)
ESA PSS-01-705 (Friction and wear testing for space application materials under vacuum)
GB/T 6040-2008 (Metallic surface wear resistance test method)
GB/T 10375-2008 (Tribological test methods – reciprocating friction and wear testing)
ISO 12137-2 (Abrasion resistance of coated fabrics and films – environmental testing)
ISO 20502 (Fine ceramics and coatings scratch / wear testing, adaptable to vacuum conditions)
JIS L 0849 (Abrasion resistance test method for plastic products, optional vacuum conditions)
JIS P 8139 (Friction and wear performance evaluation of coatings, applicable in vacuum chambers)
Parameters
| Parameter Category | Specification |
|---|---|
| Vertical Load | 10–1000 g |
| Loading Method | Weight loading, switchable configuration |
| Specimen Fixing Method | Central bolt fixing (adjustable to specimen shape); vacuum chuck (optional) |
| Force Sensor | Capacity: 9.8 N; Measurement accuracy: ±0.098 N |
| Upper Specimen Holder | Dedicated clamping fixture |
| Lower Specimen Fixing | Bolted to rotating worktable |
| Rotating Table Size | φ60 mm |
| Rotational Speed Range | 1–2000 rpm |
| Vacuum Pump System | Turbomolecular pump combined with rotary pump |
| Dynamic Strain Amplifier | Integrated within control rack |
| Friction Force / External Output | External output terminal on control rack |
| Data Analysis System | General-purpose friction analysis software |
Features
Vacuum-integrated tribological testing structure
A well-established friction and wear testing mechanism is housed within a vacuum chamber, enabling accurate testing under low-pressure conditions.
Stable and reliable loading system
The balanced weight loading method allows precise load application starting from low loads, ensuring consistent contact conditions during testing.
Flexible test configuration
The rotating worktable supports a wide range of test modes, including optional high-speed wear testing and customized low-load configurations.
Wide vacuum capability
The standard configuration achieves vacuum levels down to 10 Pa, with optional high-vacuum specifications available to meet specialized testing requirements.
Integrated data acquisition and analysis
Friction force signals are captured via a dedicated sensor and processed using professional tribological analysis software for reliable result interpretation.
Accessories
Specimen holding clamps (customized upon request)
Tribological analysis software with A/D converter
Power cable
Operation manual
Test Procedures
Install the upper and lower specimens using the designated clamping fixtures.
Seal the vacuum chamber and initiate the vacuum pump system to reach the target pressure.
Set the desired normal load using the weight loading mechanism.
Configure rotational speed and test duration parameters via the control system.
Start the test and continuously monitor friction force signals during operation.
Upon completion, vent the chamber safely and remove the specimens for post-test analysis.
Analyze friction and wear data using the supplied software.
Send product request
Other supplier products
 |
Safety Helmet Chin-strap Strength Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard GB/T 2812-2006: Safety Helmets GB/T 2811-2019: Head Protection – Vocabular... |
 |
Battery Nail Penetration Tester丨Battery Nail Penetration Test mechine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Description The test shall be carried out at an ambient temperature of 20°C±5&d... |
 |
UV-master Ultraviolet Aging Test Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The UV-master Ultraviolet Aging Test Chamber is widely used for testing light ... |
 |
Alternative to Wet leakage current test system of photovoltaic module | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The Wet Leakage Current Test System is designed to meet the requirements of the ... |
 |
Carpet hair removal measurement device | Standard ASTM D5417(Standard Test Method for Quantifying Loss of Fiber from Carpets) ISO 10362(Textile Floor Coverings - Determination of Fiber... |
Same products
 |
Electrochemical Multi-Material Reciprocating Wear Tester | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 3960-2016 Plastics &ndash... |
 |
Industrial Linear Reciprocating Friction and Wear Tester | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 3960-2016 Plastics &ndash... |
 |
Ring-on-Block Friction and Wear Test Equipment Model 2M | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 3960-2016 Plastics &ndash... |
 |
Precision Reciprocating Friction and Wear Tester Model 2M | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 3960-2016 Plastics &ndash... |
 |
Pin-on-Disc Friction and Wear Test Equipment | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 3960-2016 Plastics &ndash... |
