Belt Abrasion Tester
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The Belt Abrasion Tester is a laboratory testing instrument designed to evaluate the abrasive wear resistance of materials under controlled three-body abrasion conditions. You use a rotating pin pressed against a continuously moving abrasive belt under a constant dead-weight load, while both the pin rotation and belt speed are precisely controlled. An indexing linear slide ensures that the pin continuously contacts fresh abrasive material, providing repeatable and comparable wear results in accordance with ASTM G132.
Application
You can apply this tester in abrasive wear evaluation for the following materials and test scenarios:
(1) Abrasion resistance testing of metallic materials such as steels, non-ferrous alloys, powder metallurgy parts, and hard alloys.
(2) Wear performance evaluation of engineering ceramics and wear-resistant ceramic components.
(3) Abrasive wear testing of polymers, rubbers, engineering plastics, and composite materials.
(4) Performance comparison of surface-engineered materials including thermal spray coatings, PVD/CVD coatings, and protective wear coatings.
(5) Material screening and formulation comparison during product development.
(6) Quality control and consistency verification for industrial components.
(7) Research studies in tribology laboratories and academic institutions.
(8) Comparative testing between reference pins and test specimens under identical abrasive conditions.
Standards
ASTM G132 – Standard Test Method for Pin Abrasion Testing
Parameters
| Parameter | Specification |
|---|---|
| Pin Diameter | 2 – 10 mm |
| Pin Rotational Speed | 15 – 50 rpm |
| Maximum Load | 200 N (dead-weight loading) |
| Nominal Contact Pressure | 1 – 2.5 MPa |
| Sliding Speed | 10 – 100 m/s |
| Wear Path Length | 4 – 10 m |
| Belt Width | 100 mm |
| Belt Length | 1,200 – 2,000 mm |
| Standard Abrasive | 150-grit garnet |
| Optional Abrasives | 80 – 220 grit |
| Belt Drive | DC geared motor |
| Pin Drive | DC geared motor |
| Indexing Drive | AC servo motor |
| Test Temperature | Ambient |
| Control System | Touch-screen PLC |
Send product request
Other supplier products
 |
Compression Fatigue Testing Machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Compression Fatigue Testing Machine is a mechanical testing device designed to... |
 |
Vehicle-Level High/Low Temperature and Humidity Test Chamber | Get a quote： Whats/App: +86 181 0160 0864 TheVehicle-Level High/Low Temperature and Humidity Test Chamberis a large-scale environmental simulatio... |
 |
Helmet Webbing Micro - displacement Abrasion Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The helmet webbing micro-displacement wear testing machine is a comprehensive test... |
 |
Mattress Rollator | Get a quote： Whats/App: +86 181 0160 0864 The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-term stru... |
 |
Heavy-Duty Reciprocating Friction and Wear Testing Machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Heavy-Duty Reciprocating Friction and Wear Testing Machine is a high-performan... |
Same products
 |
Common Rail Injector Valve F00R J02 012 | Seller: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
 |
Common Rail Injector Valve F00R J02 005 | Seller: 868983 | Common Rail Injector Valve F00R J02 005 David Chen |
 |
Common Rail Injector Valve F00R J01 945 | Seller: 868983 | Common Rail Injector Valve F00R J01 945 David Chen |
 |
Common Rail Injector Valve F00R J01 941 | Seller: 868983 | Common Rail Injector Valve F00R J01 941 David Chen |
 |
Common Rail Injector Valve F00R J01 924 | Seller: 868983 | Common Rail Injector Valve F00R J01 924 David Chen |
