High Low Temperature Impact Testing Machine ASTM D256
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
(1) Impact toughness determination of rigid plastics.
(2) Impact testing of reinforced nylon materials.
(3) Impact resistance evaluation of glass fiber reinforced plastics (FRP).
(4) Impact performance testing of ceramic materials.
(5) Impact strength testing of cast stone materials.
(6) Impact testing of electrical insulating materials.
(7) Material research, quality control, and conformity assessment in laboratories, universities, and inspection institutes.
Standards
(1) JB/T 8762-1998 — Plastic Simply Supported Beam Impact Testing Machine
(2) JJG 145-2007 — Verification Regulation of Pendulum Impact Testing Machine
(3) GB 3808 — Inspection of Pendulum Impact Testing Machines
(4) GB/T 1043.1-2008 — Plastics — Determination of Impact Strength of Simply Supported Beams
(5) ISO 179-1:2010 — Plastics — Determination of Charpy Impact Properties
(6) ISO 180:2000 — Plastics — Determination of Izod Impact Strength
(7) ASTM D256 — Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
(8) ASTM D6110 — Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
Features
(1) Computer-controlled operation with digital data acquisition.
(2) Memory-type impact energy calculation with automatic result storage.
(3) Support for both simply supported beam and cantilever beam impact tests.
(4) High-speed sampling ensures accurate capture of impact signals.
(5) Digital display of impact energy and test parameters.
(6) Simple mechanical structure with stable and reliable operation.
(7) Suitable for integration with high and low temperature conditioning systems.
Parameters
| Item | Specification |
|---|---|
| Impact energy (Charpy) | 2 J / 4 J |
| Impact energy (Izod) | 2.75 J / 5.5 J |
| Sampling rate | 10 μs |
| Resolution | 16 bit |
| Load measurement accuracy | ≤ 1% |
| Impact knife angle | 30° |
| Pendulum pre-lift angle | 150° |
| Pendulum torque (Charpy) | 2.1436 N·m / 1.0718 N·m / 0.5359 N·m |
| Pendulum torque (Izod) | 2.9474 N·m / 1.4737 N·m |
Simply Supported Beam (Charpy)
| Item | Specification |
|---|---|
| Impact speed | 2.9 m/s |
| Pendulum shaft center to specimen center | 230 mm |
| Blade angle | 30° |
| Blade radius | 2 mm |
| Support corner radius | 1 mm |
| Support front angle | 5° |
| Support rear angle | 10° |
| Support span | 40 mm / 60 mm / 70 mm |
| Specimen size (L×W×T) | 80×10×4 mm; 50×6×4 mm; 120×15×10 mm |
Cantilever Beam (Izod)
| Item | Specification |
|---|---|
| Impact speed | 3.5 m/s |
| Pendulum axis center to specimen center | 335 mm |
| Blade angle | 75° |
| Blade radius | 0.8 mm |
| Blade front angle | 5° |
| Blade back angle | 10° |
| Specimen size (L×W×T) | 80×10×4 mm; 63.5×12.7×12.7 mm; 63.5×12.7×6.4 mm; 63.5×12.7×3.2 mm |
Accessories
(1) Charpy impact pendulum and supports.
(2) Izod impact pendulum and clamping fixtures.
(3) Interchangeable impact knives.
(4) Calibration and verification tools.
(5) Computer control and data acquisition software.
Send product request
Other supplier products
 |
Activated carbon wear resistance tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applicable standards: GB/T 30202.3-2013: This is the wear resistance test standard in the ... |
 |
NEXGEN Aviation Fuel Burner，Jet fuel combustion test equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com The NEXGEN Aviation Fuel Burner is an FAA-approved, next-generation aircraft fuel combustio... |
 |
Single - Strand Bending Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possib... |
 |
UV Aging Test Chamber丨UV Aging Test Mechine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The UV aging test chamber is suitable for all kinds of geo-synthetics, such as light resist... |
 |
Elastic Tape Fatigue Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com This instrument is used to test the elasticity of elastic belt after reciprocating movement... |
