Temperature Vibration Humidity Test Equipment IEC 60068-2-53 Factory Price
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
GB/T 2423.35 Procedures for combined temperature, humidity, and vibration testing, including environmental condition setting and performance monitoring
GB/T 28046.3 Focuses on automotive electrical and electronic systems, classifying severity by component installation location (e.g., engine, body) to simulate actual operating environments
GB/T 44279-2024 Covers combined temperature-humidity-vibration-low-pressure testing, enhancing simulation capabilities for extreme environments (e.g., high altitude or tropical climates)
IEC 60068-2-53 Test methods for electrical and electronic products under combined temperature, humidity, and vibration environments, emphasizing accelerated exposure of product failure modes through multi-stress superposition
ISO 16750-3 Prescribes coordinated testing of mechanical loads (vibration) and temperature conditions for automotive electronic equipment, ensuring component durability during vehicle operation
Features
1. Simultaneously simulate multiple environmental factors: Capable of concurrently simulating temperature, humidity, and vibration to more closely replicate actual product usage conditions, enhancing test accuracy.
2. Accelerates exposure of potential product defects: Through stress superposition, it expedites the manifestation of latent design flaws, manufacturing imperfections, or premature component failures, providing evidence for design enhancements.
3. Cost savings: Reduces equipment investment and testing space requirements, thereby lowering R&D and testing expenses.
Parameters
| Item | Specification |
|---|---|
| Temperature Range | -60°C ~ +150°C |
| Temperature Change Rate | ≥5°C/min (with load), average over the range of -40°C to 100°C |
| Temperature Deviation | ≤±2°C (no load, steady state) |
| Temperature Uniformity | ≤2°C (no load, steady state) |
| Temperature Fluctuation | ≤±0.5°C (no load, steady state) |
| Humidity Range | 20% R.H. ~ 98% R.H. |
| Humidity Deviation | +2% R.H. ~ -3% R.H. (when >75% R.H.), ±5% R.H. (when ≤75% R.H.) |
Accessories
(1) Removable Floor Panels: Customized interface plates to match different shaker head expanders.
(2) Flexible Thermal Bellows: High-temperature silicone or reinforced fabric sleeves to seal the shaker-to-chamber connection.
(3) Multi-Channel Accelerometers: For real-time monitoring of vibration response at different points on the specimen.
(4) Cable Access Ports: Standard 100mm or 150mm ports for power and signal lines to the device under test (DUT).
(5) CCTV Monitoring: High-definition internal camera system to record specimen behavior during high-intensity vibration.
Send product request
Other supplier products
 |
CE Certified KK-01 Scratch Resistance Tester for Quality Control Laboratory | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO 19252 — Plastics — Determination of scratch resist... |
 |
Automotive Clutch Friction Coefficient Test Machine ASTM Standard | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Automated Clutch Friction Test Machine is a laboratory test system design... |
 |
Battery Powder Compaction Density Measurement System | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard Engineered to comply with global testing standards (ISO 3953.ASTM B527), our Po... |
 |
Automated laser flash thermal conductivity analyzer | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The tester is suitable for testing thermal properties of: Metals, alloys, and... |
 |
Thermal - Cold Cycle Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard BS 7291: Compliant for thermal cycling tests on thermoplastic pipe systems (176... |
Same products
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
