Helmet Surface Friction Tester
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The Helmet Surface Friction Tester is a device used to evaluate the frictional properties of helmet surfaces. It measures how the helmet outer material interacts with different surfaces or materials, helping to assess slip resistance, abrasion, and overall surface durability under controlled conditions.
Application
The Helmet Surface Friction Tester evaluates the friction resistance of helmets. The helmet is pressed onto a movable fixture with a specified force. The fixture surface is covered with sandpaper of a standard-defined grit. The test helmet is then moved across the sandpaper at a controlled speed, allowing assessment of the helmet’s frictional performance.
Standards
Meets the requirements of ECE R22.05.
Technical Specifications
(1)The tester can perform friction tests on both protruding areas and flat surfaces of the helmet.
(2)Impact weight: 15 kg
(3)Free-fall height: 500 mm
(4)Load cell force: 400 N (40.8 kg)
(5)Release mechanism controlled by an electromagnet
(6)Sandpaper or shear blocks can be installed on the horizontal guide frame to perform linear friction with the helmet surface.
(7)Adjustable helmet mounting fixture
(8)Touchscreen control
Accessories
(1)Test Pads and Sliders: Standardized materials for simulating hand or surface contact.
(2)Helmet Holders/Fixtures: Secure helmets in a repeatable position for consistent testing.
(3)Force Sensors: Measure frictional forces accurately during testing.
(4)Data Acquisition System: Collects real-time friction data for analysis.
Test Procedures
Sample Preparation: Clean helmets and mount securely in the fixture.
Parameter Setup: Set normal load, sliding speed, and contact angle according to test requirements.
Friction Measurement: Move test pad or slider across the helmet surface while recording friction force.
Data Analysis: Evaluate surface friction coefficient, wear, or abrasion patterns.
Maintenance Information
Daily Cleaning: Wipe test pads, sliders, and helmet fixtures after each test.
Sensor Calibration: Regularly check and calibrate force sensors for accurate measurement.
Inspection of Moving Parts: Lubricate slides, check for wear, and replace worn components.
Storage: Keep the tester in a clean, dry environment, away from dust or corrosive substances.
Send product request
Other supplier products
 |
Porton Thermal Manikin Equipment ISO 12949 | Product Introduction: Porton-man was commissioned by the Defense Science and Technology Laboratory (DSTL) to accurately represent military users. ... |
 |
Vertical low temperature cold resistance testing machine / Vertical low temperature cold resistance tester | Product description: This machine is used to test finished shoes, rubber, plastic, soles, synthetic leather and other cold resistance degree to un... |
 |
Environmental Stress Cracking Resistance Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk This instrument is a testing device recommended according to standard requirements... |
 |
Transient Hot-Wire Liquid Thermal Conductivity Analyzer | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Transient Hot-Wire Liquid Thermal Conductivity Analyzer is a precision instrument ... |
 |
A Bottle Cap Torque Tester | A Bottle Cap Torque Tester is a specialized device used to measure the torque applied to bottle caps during sealing or opening processes. Its prima... |
Same products
 |
Resistance Loop Bands | Seller: Shanghai Pisces Sporting & Leisure Products Co., Ltd | Resistance Loop Bandsare versatile fitness tools designed to enhance muscle strength, flexibility... |
 |
Stainless Steel Flux Cored Welding Wire E308T1-1 E308HT1-1 E308LT1-1 Gas Shielded FCAW Wire for 304 Stainless Steel Welding | Seller: 863048 | Product Description stainless steel flux cored wire E308T1-1 E308HT1-1 E308LT1-1,FCAW stainless ... |
 |
E317LT1-1 Flux Cored Wire CO2 Stainless Steel 70% Flux Content 1.0/1.2/1.6mm Diameter OEM Customized 1200C Melting Point | Seller: 863048 | XUNZHUO STAINLESS STEEL CORED WELDING WIRE E317LT1-1 CLASSIFICATION: There are ones with diamet... |
 |
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding | Seller: Beijing JCZ Technology Co., Ltd | The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre... |
 |
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal | Seller: Beijing JCZ Technology Co., Ltd | TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig... |
