Automotive Seat Entry Exit Durability Tester | OEM Vehicle Seating Test Equipment Supplier
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Features
Four servo-electric motor-driven axes and three pneumatic functions for realistic movement.
Simulates in & out, right & left, up & down, rotation, free weight drop & recapture, and independent leg motion.
True body weight simulation (35–100kg) for realistic dynamic loading, including inertia effects.
Concurrent and programmable motion sequences for highly life-like testing.
Evaluates seat cushion, backrest, frame, foam, and fabric durability under repeated entry and exit cycles.
Adjustable test frequency, amplitude, and cycle count with automatic stop at the end of the test.
Parameters
| Parameter | Specification | Notes |
|---|---|---|
| Dummy Model | 3D indenter, 50% SAE J826-2002 | Wrapped with 12mm foam and denim |
| Pressure Head Weight | 44.5 kg | Adjustable for different test scenarios |
| Horizontal Slide | ~25 mm into cushion | Inner rear first with 30° rotation |
| Load on Pressure Head | 445 N | Maintained during creep and exit cycles |
| Rotation Angle | 30° | Simulates realistic entry angle |
| Experimental Frequency | 4.5 cycles/min | Adjustable |
| Number of Experiments | 15.000 simulated ingress/egress cycles | — |
Accessoriess
Pointer glass cover: Typically made of thickened tempered glass or acrylic, providing explosion-proof, scratch-resistant, and impact-resistant properties.
Washer: Located between the bottom of the scale and the platform, serving to absorb shock and stabilize the scale.
Zero-adjustment screw: Allows the pointer to accurately return to zero when unloaded by fine-tuning the balance system.
Weight weight: Used to measure weight.
Hook: Used to secure the weight.
Height ruler: Used to measure height.
Electronic height meter: Used to measure both height and weight.
Test Procedures
Prepare the 3D dummy indenter according to SAE J826-2002 standards. Wrap with foam and denim, and add weight to simulate realistic human mass.
Secure the seat assembly on the test bench and adjust to design position.
Program the robot motion for simulated human entry/exit:
Horizontal slide of pressure head into seat, rotating 30°
Align center line of pressure head with seat center
Creep and stabilize pressure head within the seat
Maintain 445 N load while sinking into seat
Continue creep against backrest at 30°
Maintain 445 N load as pressure head is halfway out
Slide along seat cushion edges during exit, simulating edge indentation
Start the test cycle; machine automatically repeats motions at set frequency.
Stop automatically after 15.000 simulated cycles and inspect seat for damage.
Send product request
Other supplier products
 |
OEM Surgical Blade Sharpness Tester for Medical Device Industry | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Surgical Blade Sharpness Tester is a multi-functional testing device feat... |
 |
Suture Needle Elasticity and Toughness Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Elasticity and Toughness Tester for Suture Needles is a specialized device dedicated to... |
 |
Powder Wet Vibrating Screen System For Lithium Battery Material Testing | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Powder Wet Vibrating Screen System is designed for particle size separation and distrib... |
 |
Automatic freezing point pour point cold tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: The automatic freezing point pouring point Freezing point tester is ... |
 |
Bag fastener magnetic buckle testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: This machine is mainly used to test the durability of the finished m... |
