High Precision Coolant PVT Pulse and Stability Testing Equipment Manufacturer
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Features
Combines linear and eccentric motion mechanisms for pressure pulse testing.
Operates in a pressure range of 0.1 … 5 bar.
Heats the test chamber by monitoring maximum surface temperature limits.
Automatic leak detection and leak testing with shutdown of failed samples.
Integrated recirculation pump prevents coolant leakage.
Windows / LabView-based control unit for data acquisition and monitoring.
Accessories
Test hoses and fittings
Data acquisition sensors
Leak detection probes
Temperature control modules
Linear and eccentric motion actuators
Parameters
| Parameter | Details |
|---|---|
| Machine Dimensions | 4350 mm × 2520 mm × 2150 mm (W × H × D) |
| Test Chamber Internal Dimensions | 1800 × 1000 × 1000 mm (W × H × D) |
| Rated Power | 60 kW |
| Test Medium | Glycol / Water |
| Pressure Range | 0 … 5 bar |
| Medium Flow Control | Up to approx. 100 l/min |
| Linear Motion | ±25 mm at 1 Hz ±12 mm at 5 Hz ±6 mm at 10 Hz ±2 mm at 20 Hz |
| Test Medium Temperature Range | -40°C … +150°C |
| Environment Temperature Control Range | -40°C … +150°C |
| Test Channels | 8 |
Test Procedures
Install the component to be tested in the test chamber.
Connect the test medium (glycol/water) and set the desired flow rate.
Configure test parameters including pressure range, linear/eccentric motion frequency, and temperature range.
Start the test via the Windows/LabView control unit.
Monitor real-time data for pressure, temperature, and leak detection.
The machine will automatically stop and alert you if a sample fails.
Record and export test results for analysis.
Maintenance Information
Regularly check and clean the recirculation pump and medium lines to prevent blockages.
Inspect motion actuators for wear and lubricate as recommended.
Calibrate pressure and temperature sensors periodically to ensure accurate testing.
Clean the test chamber and remove any residue from previous tests.
Update the control software and verify data acquisition integrity.
Send product request
Other supplier products
 |
DIN 75201 fogging tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Fogging Tester is mainly used to test the evaporation of volatile components ... |
 |
Cleanliness automatic extractor | Whats/App: +86 156 1874 6768 Web: standard-groups.com Component Cleanliness Cabinet equipped with cleaning modes such as pressure jet cleaning, p... |
 |
walk-in constant temperature and humidity test chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The Walk-in Constant Temperature and Humidity Test Chamber is suitable for co... |
 |
Minimum Ignition Energy (MIE) – Dust Cloud Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Dust Cloud Minimum Ignition Energy Tester disperses a certain mass of dust specimen to be t... |
 |
Dust Cloud Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Dust Cloud Minimum Ignition Energy Tester disperses a certain mass of dust specimen to be t... |
