Bio-absorbable Internal Fixation Plates and Screws Tester
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The Bio-absorbable Internal Fixation Plates and Screws Tester is a specialized mechanical testing device designed to evaluate the performance of bio-absorbable orthopedic implants. It measures properties such as bending strength, torsional stability, and pull-out resistance of plates and screws used in internal fixation. This tester simulates physiological loading conditions to ensure that implants can withstand mechanical stresses during healing, providing critical data for product development, quality control, and regulatory compliance in orthopedic applications.
Standard
(1)YY/T 0509-2009 (China): Specifies mechanical testing protocols for orthopedic plates/screws made of hydrolyzable polymers, including axial pull-out, torsion, and 4-point bending tests.
(2)ASTM F2502-17 (International): Defines methodologies for evaluating the structural integrity of bioabsorbable fixation devices under physiological loading.
(3)ISO 13779-4: Additional compliance for in vitro degradation testing of resorbable materials.
Product Advantages
(1)Multi-Modal Testing: Single platform for axial pull-out, torsion, and 4-point bending tests.
(2)Biodegradation Simulation: 37±1°C pH-controlled water bath with real-time conductivity monitoring.
(3)High-Resolution Sensors: 0.001 N force/0.001 Nm torque resolution for fragile polymer testing.
(4)Modular Fixturing: Self-centering clamps accommodate plates (20–100 mm) and screws (2.0–4.5 mm).
(5)AI-Powered Analytics: Machine learning predicts degradation-induced strength loss over time.
(6)Regulatory Compliance: Pre-loaded YY/T 0509/ASTM F2502 protocols with automated reporting.
Product Features
(1)Electromagnetic Servo Actuator: 5 kN axial/1 Nm torsional capacity with programmable load ratios (R=0.1–10).
(2)4-Point Bending Fixture: Anatomical curvature adapters replicate physiological stress patterns.
(3)Dynamic pH Control: 37±1°C water bath with pH 5.5–8.0 adjustment for degradation studies.
(4)High-Resolution Imaging: Built-in 5MP camera system for crack/corrosion analysis.
(5)Safety Suite: Emergency stop, chemical-resistant enclosure, and leak detection.
(6)Touchscreen Interface: Intuitive controls with pre-loaded ASTM/YY test sequences.
Accessories
(1)Bioabsorbable Fixture Kit:
Self-centering plate clamps (20–100 mm compatibility)
Screw torque adapters (2.0–4.5 mm diameter)
(2)pH-Controlled Water Bath:
15L capacity with recirculating pump
Corrosion-resistant titanium interior
(3)BioTest Pro Software:
Automated degradation curve generation and strength retention analysis
21 CFR Part 11-compliant audit trail with blockchain timestamping
Remote monitoring via iOS/Android app
(4)Operator Kit:
Calibrated torque wrench set (0.1–1 Nm)
Implant alignment jigs (ASTM F2502 compliant)
(5)Calibration Bundle:
NIST-traceable force/torque calibration weights
pH electrode calibration solution
(6)Safety Kit:
Chemical-resistant gloves
Acoustic enclosure with 25 dB noise reduction
Technical Parameters
| Parameter | Specification |
|---|---|
| Max. Axial Force | ±5.000 N (0.001 N resolution) |
| Max. Torsional Moment | ±1 Nm (0.001 Nm resolution) |
| Bending Span | 40–120 mm (1 mm increments) |
| pH Control Range | 5.5–8.0 (0.1 resolution) |
| Temperature Control | 37±1°C (PT1000 sensor) |
| Data Sampling Rate | 10 kHz (synchronized across 8 channels) |
| Power Requirements | 220V/110V ±10%, 50/60Hz, 1.200W |
| Dimensions (W×D×H) | 500 × 450 × 750 mm |
| Weight | 75 kg (net) / 90 kg (with bath) |
| Noise Level | <50 dB (A-weighted) |
Send product request
Other supplier products
 |
Safety Helmet Chin-strap Strength Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Safety Helmet Chin-strap Strength Tester is designed to evaluate the tensile s... |
 |
Fabric Friction Charge Tester | Get a quote: Whats/App: +86 181 0160 0864 The Fabric Friction Charge Tester is a precision instrument designed to measure the electrostatic charg... |
 |
Multiplex Sand/Wheel Abrasion Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Multiplex Sand/Wheel Abrasion Tester is a floor-standing abrasion testing syst... |
 |
Perforated Leather Abrasion Tester | Get a quote： Whats/App: +86 181 0160 0864 The Perforated Leather Abrasion Tester is designed to evaluate the abrasion resistance and surface dura... |
 |
Carbon Arc Aging Chamber | Get a quote： Whats/App: +86 181 0160 0864 Carbon arc aging chamber is mainly used to simulate the destructive effects of ultraviolet rays, temper... |
Same products
 |
Resistance Loop Bands | Seller: Shanghai Pisces Sporting & Leisure Products Co., Ltd | Resistance Loop Bandsare versatile fitness tools designed to enhance muscle strength, flexibility... |
 |
Stainless Steel Flux Cored Welding Wire E308T1-1 E308HT1-1 E308LT1-1 Gas Shielded FCAW Wire for 304 Stainless Steel Welding | Seller: 863048 | Product Description stainless steel flux cored wire E308T1-1 E308HT1-1 E308LT1-1,FCAW stainless ... |
 |
E317LT1-1 Flux Cored Wire CO2 Stainless Steel 70% Flux Content 1.0/1.2/1.6mm Diameter OEM Customized 1200C Melting Point | Seller: 863048 | XUNZHUO STAINLESS STEEL CORED WELDING WIRE E317LT1-1 CLASSIFICATION: There are ones with diamet... |
 |
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding | Seller: Beijing JCZ Technology Co., Ltd | The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre... |
 |
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal | Seller: Beijing JCZ Technology Co., Ltd | TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig... |
