ISO 6722 Automotive Wire Vibration Wear Test Equipment Supplier Factory Direct
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Parameters
| Parameter | Specification |
|---|---|
| Vibration Frequency | 10 Hz |
| Vibration Amplitude | 6.35 ± 0.25 mm |
| Vibration Direction | Horizontal |
| Fixed Wire Support Distance | 280 mm |
| Movable Wire Support | One point on fixed platform, other passes through guide >14× wire diameter |
| Distance Between Vibration and Fixed Table | 45 mm |
| Friction Point | Midpoint of sample (10% position) |
| Applied Mass | 10 N, 12.5 N, 15 N, 20 N |
| Abrasion Count Setting | 1–9999 cycles adjustable |
| Automatic Stop | When wire insulation is breached and conduction occurs |
Features
(1) Simulates real-world vibration conditions to evaluate wire-to-wire insulation wear.
(2) Adjustable load weights allow testing under different pressure conditions.
(3) Horizontal vibration table ensures uniform abrasion across the wire surface.
(4) Automatic shutdown prevents damage once insulation failure or short circuit occurs.
(5) Supports a wide range of cycle settings for long-term durability evaluation.
Accessories
(1) Fixed wire clamps for secure positioning.
(2) Movable wire guide supports.
(3) Set of standard weights (10 N, 12.5 N, 15 N, 20 N).
(4) Vibration control panel.
(5) Instruction manual and testing guide.
Test Procedures
(1) Install the test wires on the fixed and movable supports according to wire diameter and sample length.
(2) Set the vibration frequency, amplitude, and horizontal direction on the control panel.
(3) Select the desired load weight to apply to the wire contact point.
(4) Configure the number of abrasion cycles.
(5) Start the test; the instrument will apply horizontal vibration to the wires.
(6) Monitor the test; the machine will automatically stop if wire insulation breaks and electrical conduction occurs.
(7) Record the abrasion cycles at which failure occurs and analyze insulation wear.
Send product request
Other supplier products
 |
Manikin Flame Engulfment Test Apparatus，ISO 13506 burning manikin | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction The Manikin Flame Engulfment Test Apparatus conforms to gbt23467-2009. iso135... |
 |
Advanced haptic feedback skill logging system | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application You can apply the Haptic Skill Logger in the following scenarios and test obje... |
 |
Aerosol Foams Flammability Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction This product complies with "Recommendations on the Transport of Dange... |
 |
High Accuracy Scratch Resistance Tester KK-02 for Tribology Research | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO 19252 — Plastics — Determination of scratch resist... |
 |
Computer Controlled Vertical Universal Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB 3960-2016: Test Method for Sliding Wear of Plastics GB/T 8681-2000: Test Met... |
Same products
 |
MMA-120 Handheld Arc Welder | Seller: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
