ISO 6722 Automotive Wire Vibration Wear Test Equipment Supplier Factory Direct
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Parameters
| Parameter | Specification |
|---|---|
| Vibration Frequency | 10 Hz |
| Vibration Amplitude | 6.35 ± 0.25 mm |
| Vibration Direction | Horizontal |
| Fixed Wire Support Distance | 280 mm |
| Movable Wire Support | One point on fixed platform, other passes through guide >14× wire diameter |
| Distance Between Vibration and Fixed Table | 45 mm |
| Friction Point | Midpoint of sample (10% position) |
| Applied Mass | 10 N, 12.5 N, 15 N, 20 N |
| Abrasion Count Setting | 1–9999 cycles adjustable |
| Automatic Stop | When wire insulation is breached and conduction occurs |
Features
(1) Simulates real-world vibration conditions to evaluate wire-to-wire insulation wear.
(2) Adjustable load weights allow testing under different pressure conditions.
(3) Horizontal vibration table ensures uniform abrasion across the wire surface.
(4) Automatic shutdown prevents damage once insulation failure or short circuit occurs.
(5) Supports a wide range of cycle settings for long-term durability evaluation.
Accessories
(1) Fixed wire clamps for secure positioning.
(2) Movable wire guide supports.
(3) Set of standard weights (10 N, 12.5 N, 15 N, 20 N).
(4) Vibration control panel.
(5) Instruction manual and testing guide.
Test Procedures
(1) Install the test wires on the fixed and movable supports according to wire diameter and sample length.
(2) Set the vibration frequency, amplitude, and horizontal direction on the control panel.
(3) Select the desired load weight to apply to the wire contact point.
(4) Configure the number of abrasion cycles.
(5) Start the test; the instrument will apply horizontal vibration to the wires.
(6) Monitor the test; the machine will automatically stop if wire insulation breaks and electrical conduction occurs.
(7) Record the abrasion cycles at which failure occurs and analyze insulation wear.
在线联系供应商
Other supplier products
 |
Carbon Rod for Aging Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard Compliant with ISO 9001. ASTM D3045. and IEC 60216 standards for material aging t... |
 |
Bone Fixation Screw Self-Tapping Test Machine ISO/ASTM Standards | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1)ISO 6475: Implants for surgery – Wear of total hip-joint ... |
 |
Toilet Corrosion Test Chamber for HCl and Ammonia Resistance Testing | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 4706.53-2024: Safety of household and similar electrical appl... |
 |
Industrial Oven for Batteries | Whats/App: +86 156 1874 6768 Web: standard-groups.com Features and Benefits 1.Real-time temperature monitoring, temperature range can be customi... |
 |
Deval abrasion testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: Diphal abrasion testing machine is mainly used for stone abrasion ra... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
