IEC 60331 Cable Fire Resistance Test Equipment Supplier
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
E-mail：info@standard-groups。com
Technical Specifications
| Item | Technical Specification |
|---|---|
| Test Station | Single station (one sample at a time) |
| Sample Length | ≥1200 mm |
| Burner Type | Ribbon propane burner with Venturi mixer |
| Burner Nominal Length | 500 mm |
| Gas Flow Rate | 0–50 L/min (adjustable) |
| Gas Flow Accuracy | ±0.1 L/min |
| Air Flow Rate | 0–200 L/min (adjustable) |
| Air Flow Accuracy | ±5 L/min |
| Flame Temperature Range | 450–950 °C (adjustable) |
| Temperature Sensors | K-type stainless steel thermocouples ×2 |
| Thermocouple Max Temperature | ≤1100 °C |
| Control Method | PLC + touchscreen operation |
| Power Consumption | 3 kW |
| Power Supply | AC 380 V ±10%, 50 Hz, three-phase five-wire |
| Gas Supply | Propane / LPG + compressed air |
Product Features
Mass flow controllers enable high-precision closed-loop control of gas and air flow.
Wide flame temperature adjustment range meets different fire-resistance test requirements.
Circuit integrity detection via breaker replaces traditional fuse structures, improving maintenance efficiency.
Continuous live monitoring system detects open or short circuits in real-time.
Side-mounted exhaust system ensures stable oxygen levels during combustion.
PLC + touchscreen control allows intuitive parameter settings and excellent test repeatability.
Compatible with multiple fire-resistance test modes, including water-spray fire-resistance and mechanical impact tests.
Accessories and Consumables
| Category | Name | Description |
|---|---|---|
| Standard Configuration | Tubular gas burner | Suitable for fire-resistance and water-spray fire tests |
| Mass flow controller | Precision control of gas and air | |
| K-type thermocouple | Temperature monitoring | |
| Continuous monitoring device | Includes transformer and indicator lights | |
| Exhaust assembly | Rapid exhaust of combustion gases | |
| Optional | Water-spray fire device | Complies with BS 6387 W-class |
| Mechanical impact device | Complies with BS 6387 Z-class | |
| Consumables | Gas | Propane or LPG |
| Test cable | Test specimen | |
| Seals | Periodic replacement required |
Testing Principle
During the test, the mass flow controller precisely adjusts the gas-to-air ratio, producing a stable and controllable high-temperature flame. The test cable is subjected to continuous flame while all cores are energized at rated voltage and a load current close to 0.1 A.
A continuous monitoring system observes the circuit status in real-time. Any short-circuit or open-circuit condition triggers an immediate signal, allowing evaluation of whether the sample maintains circuit integrity under the specified flame and loading conditions.
Operation Instructions
Ensure all gas lines, air lines, and exhaust systems are properly connected before testing.
Set the gas flow, air flow, and test duration according to the relevant standard.
Activate the exhaust system before ignition to ensure combustion gases are removed.
Do not open the test chamber door during testing.
For water-spray or water-jet fire tests, calibrate the flow meters and verify the tray setup before ignition.
Send product request
Other supplier products
 |
Battery Powder Compaction Density Measurement System | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Battery Powder Compaction Density Measurement System is a precision testing system de... |
 |
Helmets Designated Protection Areas Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The helmet designated protection area testing device is a piece of equipment used to mark t... |
 |
ASTM G99 Multi-Functional Tribology Tester for Advanced Material Research | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Multi-Functional Tribology Tester is a high-precision friction and wear t... |
 |
EN 31092 thermal resistance equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Measurement of the thermal resistance and the evaporative resistance, under s... |
 |
ISO Hydrogen Fuel Cell Air Test System Manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com E-mail：info@standard-groups。com Parameters ParameterUnitValue Te... |
Same products
 |
MMA-120 Handheld Arc Welder | Seller: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
