Large Flame Exposure Test Chamber for Certification Laboratories

• 

Get a quote：

Whats/App: +86 156 1874 6768

Web: standard-groups.com

E-mail：info@standard-groups。com

Parameters

Test Procedures

Sample Preparation: Prepare samples according to the test standard requirements, ensuring that the size, shape, and quantity of the samples meet the test requirements.

Equipment Calibration: Check that all components of the equipment are functioning correctly, such as the ignition device and flow meter. Ensure that the gas supply system is in good working order.

Sample Installation: Secure the sample in the sample holder, ensuring its stability and vertical alignment during the test.

Gas Mixing and Supply: Adjust the flow rates of oxygen and nitrogen (if applicable) according to the test requirements, and supply the mixed gas to the combustion chamber after mixing in the mixing chamber. Ensure that the oxygen concentration of the mixed gas meets the test standard requirements (if applicable). For large-flame flammability testers, the focus is primarily on the supply of combustible gas and the stability of the flame.

Ignition and Timing: Turn on the ignition device to ignite the burner. Simultaneously start the timing device to record the burning time of the sample. When the sample burns to the specified length or the burning time reaches the preset value, turn off the ignition device and the gas supply system.

Data Recording and Analysis: Record all data during the test process, such as burning time and flame spread rate. Calculate the relevant parameter values according to the test standard requirements, and analyze and interpret the test results.

Maintenance Information

(1) Inspect gas lines, burners, and flowmeters for proper function and leaks.

(2) Clean the stainless steel chamber regularly to prevent soot buildup.

(3) Ensure timing system accuracy and check the calibration of the flowmeter periodically.

(4) Replace worn sample holders and burner nozzles as needed.

Other supplier products

	Falling Sand Abrasion Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The falling sand abrasion tester is used to test the abrasion resistance of coatings under ...
	Circular Sample Cutter Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Circular Sample Cutter Tester is a manual precision instrument designed to cut standard...
	Medical Suture Line Diameter Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Medical Suture Thread Diameter Tester is a specialized testing equipment used for measu...
	Electrochemical Corrosion and Wear Testing Machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com Electrochemical corrosion and wear testing machines are widely used in materials science, m...
	Advanced fireproof coatings small sample furnace	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com TheSmall Sample Test Furnace for Steel Structure Fireproof Coatingis a specia...

Same products

	MMA-120 Handheld Arc Welder	Seller: 871183	The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con...
	SHX Series Circulating Fluidized Bed Steam Boiler	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi...
	YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ...
	DHL Series Coal-Fired Steam Boilers	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b...
	SZL Series Biomass Steam Boiler	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi...