Fabric Horizontal Burning Tester | FMVSS 302 & ISO 3795 Horizontal Flammability Test Chamber Manufacturer
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
E-mail：info@standard-groups。com
Features
Dual-Chamber Structure: Isolated electrical control unit and combustion chamber enhance safety and operational stability.
Multi-Material Testing: Suitable for automotive interiors, public transport components, and industrial textiles.
Adjustable Ignition System: Angled burner (0° or 45°) with precise燃气pressure control (0-50kPa).
High-Precision Measurement: Accurately tracks flame spread distance and time (resolution: 0.1s).
User-Friendly Interface: Digital display for real-time monitoring and data storage.
Compliance-Driven: Aligns with ASTM, ISO, SAE, and DIN standards for global market access.
Parameters
| Parameter | Specification |
|---|---|
| Ventilation Slot Height | 13 mm |
| Vent Hole (Bottom) | Diameter φ19 mm × Depth 10 mm |
| Observation Window Width | 330 mm |
| Sample Rack Dimensions | 255 mm × 200 mm × 170 mm (L×W×H) |
| Sample Fixture | U-Type, 355 × 25 × 10 mm (Inside Margin: 50 mm) |
| Flame Box Dimensions | 368 mm × 216 mm × 356 mm (L×W×H) |
| Burn Timer | Accuracy: ±0.1 s |
| Standard Flame Height | 38 mm |
| Collection Plate | 55 mm × 119 mm × 19 mm |
| Ignition Time | 15 s (Adjustable) |
| Overall Dimensions | 390 mm × 200 mm × 390 mm (L×W×H) |
| Support Wire | φ0.25 mm (High-Temperature Resistant Wire) |
| Spading | 25 mm |
| Weight | 31 kg |
| Power Supply | AC 220V ±10%, 50Hz |
Accessoriess
A. Automatic gas control system (1 set);
B. DIN 75200 (Vehicle Interior Materials) testing accessories:
Includes: 1 burner, 2 nozzles;
C. SAE J369 (Polymer Interior Materials) testing accessories:
Includes: 1 burner, 2 nozzles;
D. ASTM D5132 (Polymeric Materials in Motor Vehicle Interiors) testing accessories:
Includes: 1 burner, 2 nozzles;
E. Other testing standards: 1 burner and 1 nozzle each.
Test Procedures
1. Take out the pre-treated sample. Place the sample with a napped or tufted surface flat on a level surface. Use a metal comb conforming to the requirements of 4.2.5 to comb the napped surface twice in the opposite direction of the pile.
2. Light the gas lamp with the air inlet closed. Adjust the flame using the flame height indicator plate so that the flame height is 38 mm. Before starting the test, the flame should burn steadily in this state for at least 1 minute, and then be extinguished.
3. Mount the sample in the sample holder with the exposed surface facing downwards. Install the sample so that both sides and one end are clamped by the U-shaped holder, and the free end is aligned with the opening of the U-shaped holder. Only when the sample width is insufficient for the U-shaped holder to clamp the sample, or when the free end of the sample is soft and easily bent, causing unstable combustion, should the sample be placed on a sample holder with heat-resistant metal wires for the combustion test.
4. Push the sample holder into the combustion chamber. Place the sample in the center of the combustion chamber in a horizontal position. Light the gas lamp with the air inlet closed, and adjust the flame height to 38 mm. Ignite the free end of the sample in the flame for 15 seconds, then extinguish the flame (close the gas lamp valve).
5. The flame burns forward from the free end of the sample. Start timing the moment the base of the propagating flame passes the first mark. Observe the flame propagation on the faster burning side, and the timing should be based on the faster burning side.
6. Stop timing when the flame reaches the second mark or when the flame is extinguished before reaching the second mark. The timing should also be based on the faster burning side. If the flame is extinguished before reaching the second mark, measure the burning distance from the mark to the point where the flame is extinguished. The burning distance refers to the length of the burned portion on the surface or inside the sample.
7. If the non-exposed surface of the sample has been cut, the timing should be based on the flame propagation speed of the exposed surface. 8. The requirements for burning rate do not apply to surfaces formed by cutting the test specimen.
9. If the specimen burns slowly for an extended period after the start of timing, the test may be stopped after 20 minutes, and the burning time and burning distance should be recorded.
Send product request
Other supplier products
 |
Spray aerosol ignition distance tester for EN flammability safety testing | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards United Nations Recommendations on the Transport of Dangerous Goods... |
 |
ASTM E119 Fireproof Coating Test Furnace Supplier | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com E-mail：info@standard-groups。com Features Compact Design: Optimized for sma... |
 |
Automotive Seat Foam BS5852 Fire Resistance Tester OEM Supplier | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features ◆Stainless steel sample frame. ◆The dimension is 450 mm X300 mm X1... |
 |
Car Seat Belt Locking Performance Tester | ISO & ECE R16 Automotive Safety Testing Machine Factory Supplier | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features 1、Advanced PLC Control System Ensures stable test execution, autom... |
 |
Melt Mass-Flow Rate Test Machine, ASTM D1238-98 | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction: This machine is deisgned according to ISO1133. ASTM D1238-98 ,ISO1133; Melt ... |
Same products
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
