Face Mask Tensile Tester

The Face Mask Tensile Tester is designed to measure tensile strength, elongation at break, and related mechanical properties of various textiles and materials. The instrument integrates a motor with a speed control system, driving a synchronous belt deceleration mechanism and lead screw pair to apply controlled loads. It features a load measuring system and a deformation measuring system, with real-time display of control parameters and measurement results on an LCD screen. The tester provides overload protection, precise displacement measurement, and versatile testing capabilities for textiles, automotive interior materials, zippers, and leather.

Application

The Face Mask Tensile Tester is suitable for mechanical property evaluation across the following industries and products:

(1) Medical and Healthcare Industry: surgical masks, medical face masks, N95/FFP masks, disposable masks — tensile strength and elongation testing

(2) Textile Industry: woven fabrics, knitted fabrics, nonwoven fabrics, coated fabrics — tensile, elongation, and mechanical performance testing

(3) Automotive Industry: seat covers, interior textiles, leather trim, composite materials — tensile strength and elongation testing

(4) Leather and Accessories Industry: leather, zippers, straps, belts — tensile, tear, and adhesion strength testing

(5) Research and Development: development of new textile and mask materials, mechanical property evaluation, material comparison

(6) Quality Control: production batch verification, inspection of material strength and deformation properties

(7) Third-Party Testing Laboratories: certification testing, laboratory verification of textile and mask mechanical performance

The instrument is widely used for product development, production quality control, R&D, and laboratory testing.

Standards

The instrument complies with and can be applied to the following standards (including but not limited to):

(1) GB/T 32610-2016 – Technical Specification for Daily Protective Masks

(2) GB 19083-2010 – Technical Requirements for Medical Protective Masks

(3) YY 0469-2011 – Technical Requirements for Medical Surgical Masks

(4) GB 2626-2006 – Respiratory Protective Equipment: Filtered Particulate Respirator

(5) GB 2890-2009 – Test Methods for the Mechanical Properties of Textile Materials

(6) GB/T 16556-2007 – Testing Methods for Tensile and Elongation Properties of Fibers

(7) GA 124-2013 – Tensile Testing Standard for Protective Materials

Features

(1) Easy to operate, suitable for all users

(2) High measurement accuracy, certified by third-party testing organizations

(3) High-speed, low-vibration, low-noise motor drive

(4) High rigidity design, sturdy and durable

(5) Multi-language interface for international applications

(6) Automatic return to start position after test completion

(7) Automatic calculation of maximum force, minimum force, average force, maximum deformation, elongation, and tensile strength

(8) Supports tensile, bending, compression, folding, adhesion, tearing, peeling, and elongation tests

(9) Equipped with mechanical travel switch, emergency stop switch, overcurrent/overvoltage/undercurrent/undervoltage/leakage overload protection

(10) Software overload limit protection and breakpoint shutdown protection

Technical Parameters

Item	Specification
Maximum Test Force	100 N (optional 5000 N)
Operation Mode	Microcomputer, full Chinese menu
Measuring Range	0 – 100 N
Accuracy Level	Class 1 / Class 0.5
Test Force Accuracy	±1%
Minimum Test Force Resolution	0.001 N
Displacement Resolution	0.01 mm
Deformation Accuracy	±1%
Speed Regulation Range	0.001 – 500 mm/min (infinitely variable)
Test Speed	50, 100, 150, 200, 250, 300, 500 mm/min
Tensile Stroke	700 mm
Overall Dimensions (L × B × H)	540 mm × 280 mm × 1450 mm
Power Supply	AC 220 V, 50 Hz
Net Weight	80 kg

Accessories

Main testing unit

Synchronous belt and lead screw assembly

Load and deformation measuring system

LCD display controller

Sample clamps for textiles, masks, zippers, and leather

Power cable

Operation manual

Calibration certificate

Test Procedures

(1) Mount the specimen in the appropriate clamps

(2) Set test parameters: test force, speed, and tensile stroke

(3) Start the automatic test via the microcomputer controller

(4) Observe real-time force and displacement on the LCD screen

(5) Record maximum force, elongation, and other calculated values

(6) Repeat tests for multiple specimens or different conditions

(7) Clean the clamps and measurement area after testing

Maintenance Information

(1) Regularly clean clamps and lead screw mechanisms

(2) Verify calibration of load and displacement sensors periodically

(3) Inspect motor, control system, and safety switches for proper operation

(4) Keep the instrument in a dry and clean laboratory environment

(5) Maintain operation manual and calibration documentation for reference

Other supplier products

	Automotive Interior Burning Tester	Product Introduction The Automotive Interior Burning Tester is designed according to ISO3795 standards. Suitable for horizontal burning tests of i...
	Oxidizing liquid time pressure tester	Conforms to UN Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria 11.6.1 Test 1(c)(i): Time/Pressure Test, 12.6.1 T...
	Resistance to flame propagation tester,ECE R118 Annex 10	Introduction This equipment is designed and manufactured according to ECE R118 Annex 10. This model is intelligent, with PLC and touch screen inte...
	Protective Clothing Resistance Tester	Related Standards GB/T 22042 - 2008 Clothing - Anti-static Performance - Test Method for Surface Resistivity GB/T 22043 - 2008 Clothing - Anti-st...
	Building material products single combustion tester，BS 476 part 6 flame spread machine	Product Information Single Burning Items(SBI), as a European evaluation of the fire-resistance performance of building materials, measures heat re...

All supplier products

Same products

	Full-Body Garment Stress Tester,FZ/T 70015	Seller: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Seller: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Seller: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Seller: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Seller: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...