DN25-300 mm ，Stationary Valve Core Grinding Machine Stationary Valve Grinding Machine

Feature:1、Stationary, more stable and durable2、double station design,Easy to operate, higher efficiency

1)diameter of Grinding disc: Dia500mm

2)Scope of Grinding:Dia25-Dia300mm

3)Quantity of grinding disc:2 pcs

4)Application : valve core of plane globe valve, gate valve .

5) Motor Power:1100W,Double motor.

6)Speed regulation mode:Variable frequency stepless speed regulation

7)Power supply: 220 V/50Hz

8) motor power: 1100W x2=2.2kw double motor

Stationaryvalve grinding machineis suitable for the valve disks of gate valves and globe valves,it is widely applied in coal-fired power petrochemical steel metallurgical paper and other industriesFeature:1、Stationary, more stable and durable2、Double operating position design,Easy to operate, higher efficiency

1)diameter of Grinding disc: Dia500mm

2)Scope of Grinding:Dia25-Dia300mm

3)Quantity of grinding disc:2 pcs

4)Application : valve core of plane globe valve, gate valve .

5) Motor Power:1100W,Double motor.

6)Speed regulation mode:Variable frequency stepless speed regulation

7)Power supply: 220 V/50Hz

8) motor power: 1100W x2=2.2kw double motor

1．Connect the 380V power supply and turn on the total power supply.

2．Before starting the equipment, check whether there is any foreign body around the grinding disc and deal with it.

(1) Device startup key: RUN Device stop key: STOP Forward and Reverse conversion key: JOG

(Note: when the forward and reverse conversion is done, the position of the triple lever should be adjusted accordingly).

Speed adjustment: knob on the panel rotation adjustment or up and down key adjustment.

(2) Other key suggestions should not be adjusted so as to avoid confusion.

(1) Before grinding the spool, adjust and fix the triple lever according to the size of the spool, and install the roller assembly on the triple lever, adjust the position and press firmly. Apply the corresponding abrasive grout on the grinding plate. (see grinding process)

(2) Grinding and repair of round spool.

The spool is placed in the middle of the angle between the three retaining bars and contacts with the roller to start the equipment for grinding. Or put the spool roller between the angle of the triple bar and contact with the roller, put one or more spools into the roller, start the equipment for grinding.

(3) Grinding of Gate valve spool:

Place the spool roller between the angle of the triple lever and contact the roller. Place one or more spools in the roller and start grinding.

(4) Hand held grinding:

The small spool with less damage will put the spool on the grinding disc, and start the equipment to carry out grinding by hand.

(5) the left and right two lapping plates are controlled by two transducers on the left side and the right side respectively, and the operation mode is the same.

The abrasive paste with different sizes should be replaced according to different grinding needs. The abrasive paste is stirred and coated on the abrasive plate with machine oil. Before grinding, the high point burr on the spool should be removed before grinding.

1)Rough grinding:

Choose 60 -120# abrasive paste to remove defects such as groove marks, pits, scratches, etc.

2).Fine grinding:

Grinding around 240# or so is used to remove minor scratches.

3). Finish grinding:

More than 400 #grinding paste is used to finish the polishing.

Valve Polishing Machine, Stationary Valve Core Grinding Machine, Gate Valve Grinder Factory

Hot Sale Various High Quality Valve Grinder, Valve Test Bench, Pipe Beveling & Cutting Machine. The portable & Stationary Valve Grinding Machineis suitable for Gate Valve, Globe Valve, Safety Valve. As fames China Valve Seat grinded Machine, High quality and factory price will give you.

Other supplier products

	M-200 Portable Gate Valve Grinding Machine	M-200 Portable Gate Valve Grinding Machine Applicstion:Gate Valve Seat,Gate Valve Core. Grinding scope: DN80~200(3"-8") Motor power: 1100W Rated V...
	MT-600 Stationary Valve Grinding Machine	MT-600 Stationary Valve Grinding Machine Stationary valve grinding machine is suitable for the relief valve off site repairing, widely applied in ...
	Horizontal Type SYTW600/5-32 Top Pressure Valve Test Bench， Horizontal Type Valve Pressure Test Bench ，Valve Pressure Test Bench	Horizontal TypeValvePressure Test Bench 1) Applicable to gate valve,globe valve,ball valve,Check valve and etc direct-flange connection valves 2...
	MZ150 Portable Gate Valve Grinding Machine	MZ150 Portable Gate Valve Grinding Machine Portable Valve Grinding and Lapping Machine For Gate Valves Technical indicators Applicstion:Gate Valv...
	MT-800X Stationary Valve Core Grinding Machine	MT-800X Stationary Valve Core Grinding Machine Stationary valve grinding machine is suitable for the valve disks of gate valves and globe valves,i...

All supplier products

Same products

	11A2 Vitrified Diamond Wheel for PCD Tools Grinding	Seller: Henan Moao superhard material	Applications Of Vitrified Diamond Wheel For Pcd Especially for PCD/PCBN tools’rough,medium...
	Resin Wheels for Glass	Seller: Henan Moao superhard material	Applicable Machine Of Resin Diamond Wheels Glass straight edging machine, glass double edging ...
	JR new material company Dental milling burs	Seller: JR(GUANGDONG) NEW MATERIAL INCORPORATED COMPANY	Product Advantages: Good wear resistance. 2. Complete product range, suitable for all kinds of...
	Resin Bond Diamond Cutting Wheels	Seller: Henan More Super Hard Products Co., Ltd	Resin bond diamond cutting wheels (dicing blades) with the characteristic of vertical consumption...
	Horizontal Type SYTW600/5-32 Top Pressure Valve Test Bench， Horizontal Type Valve Pressure Test Bench ，Valve Pressure Test Bench	Seller: Metals Kingdom Industry Limited/ Sincere Union Imp&Exp Co.,Ltd	Horizontal TypeValvePressure Test Bench 1) Applicable to gate valve,globe valve,ball valve,Che...