10L-20L high pressure/high temperture reactors
These reactors are available with an FKM O-ring seal for operating temperatures to 225 °C, and FFKM O-ring for temperatures to 300 °C, or with a flat, PTFE gasket for operating temperatures up to 350 °C maximum.
In the moveable head design, the vessel is held in a support system which minimizes the physical effort required to handle these heavy components. The hoist is attached to a support column which provides a convenient means for lifting the head and cylinder out of the stand. These components may be transferred to the holding position on the right side of the stand. Vessels equipped with a bottom drain valve will probably remain in the heater most of the time, but can be lifted out when necessary.
Other supplier products
|
|
100-2000LOpen ellipse sealing type reactor |
Wide applicable range,pressure is relatively low,ones whose common pressure is lower than 5.0MPa(725psi),capacitance is lower than 3000L will choos... |
|
|
Magnetic stirring stainless steel reactor |
Its stirring system adopts static seal,stirrer is connectde to motor driver with magnetic stirrer with touchless transfer torque,thus to replace dy... |
|
|
WDF lab series high rotation speed magnetic stirred reactor |
It adopts end U type magnetic stirrer with completely static seal, no leakage ,high temperature-high pressure and high vacuum resistance ,high rota... |
|
|
WDFS lab series magnetic stirred reactor |
On the basis of WDF reaction kettle,pedestal,rack and crane are equipped,lifting handwheel on rotational equipment drives thread rod to life kettle... |
|
|
Water heating pressure micro-reactor |
Water heating reactor, also calledmicro-reactor or pressure shell,has low cost,easy structure,stainless steel bearing parts,lined with PTFE liner,f... |
All supplier products
Same products
