XLNT-3000 3000W Fiber Laser Cutter Chiller
XLNT-3000 3000W Fiber laser cutter chilleris suitable for 3000W fiber laser cutter. XLNT-3000 adopts intelligent dual-temperature dual-control mode, which can cool the fiber laser generator and QBH connector at the same time. It has an ultra-high temperature control accuracy of ±0.3°C. It is also equipped with professional water filtration and purification equipment, which truly realizes a machine with multiple uses, environmental protection and energy-saving.
Advantage Of XLNT-3000 3000W Fiber Laser Cutter Chiller
The cooling capacity is 8500W.
It is equipped with protection functions such as flow alarm, high-temperature water alarm and low-temperature water alarm.
The industrial water cooled chillers are equipped with a deionizing filter to ensure the cleanliness of the laser cooling water circuit.
There are multiple fault detections inside to protect the laser in a normal state, and a signal output port is also equipped.
Specification Of XLNT-3000 3000W Fiber Laser Cutter Chiller
|
Voltage |
220v |
|
|
Frequency |
50hz |
60hz |
|
Current |
4A-17.3A |
|
|
Compressor power |
||
|
Cooling capacity |
24566Btu/h |
23884Btu/h |
|
6192kcal/h |
6020kcal/h |
|
|
Electric assisted power |
400W+1800W |
|
|
Refrigerant |
R-22/R410A |
|
|
Precision |
±0.5℃ |
|
|
Reducer |
Capillary |
|
|
Protection |
Over-current protection for compressor, flow alarm, over-temperature alarm |
|
|
Pump power |
||
|
Tank capacity |
40L |
|
|
Inlet and outlet |
Rp1/2'' + Rp1'' |
|
|
53M |
||
|
70L/MIN |
||
|
95KGS |
||
|
113KGS |
||
|
Product dimension |
78*47*89CM(L*W*H) |
|
|
Packing dimension |
87*60*109CM(L*W*H) |
|
Application Of XLNT-3000 3000W Fiber Laser Cutter Chiller
This chiller for laser machine is suitable for 2000W~3000W fiber laser equipment.
More Details Of XLNT-3000 3000W Fiber Laser Cutter Chiller
On-top Cooling Fan, Ultra-quiet
The Side Panel Wind Tunnel Design, Detachable, Helps Heat Dissipation In All Directions
Equipped With High And Low Temperature Dual Protection
As a leading water chiller system supplier, Xlntchillers provides industrial chiller cw 5200, laser cutter cooling system, laser cooling system, etc. Contact us to buy welding water chiller or know more.
Send product request
Other supplier products
 |
Fume Extractor | Fume extractor is a kind of mobile industrial dust purifier equipment, which is mainly used to purify the smoke and exhaust gas that are harmful ... |
 |
WRC-300 10L Tig Welder Cooler | WRC30010L TIG welder cooleris a circulating cooling equipment with water tank capacity of 10L and maximum head of water pump of 30m. It is mainly u... |
 |
CW5000 80W-100W Co2 Small Chiller | CW5000 80W-100W Co2 Small Chiller CW5000 co2 chilleris suitable for cooling the laser tube of 80-100W co2 laser machine. CW5000 equipped with 800W... |
 |
XLNT-1500 1500W Fiber Laser Water Chiller | XLNT-1500 1500W fiber water cooleris specially developed and produced to meet the cooling requirements of the 1500W fiber laser machine. XLNT-1500 ... |
 |
WRC-500 25L Welding Chiller | WRC-500 25L Welding chiller has a water tank capacity of 25L. The water tank has a large capacity and a fast cooling speed. It is mainly used to co... |
