XLNT-3000 3000W Fiber Laser Cutter Chiller
XLNT-3000 3000W Fiber laser cutter chilleris suitable for 3000W fiber laser cutter. XLNT-3000 adopts intelligent dual-temperature dual-control mode, which can cool the fiber laser generator and QBH connector at the same time. It has an ultra-high temperature control accuracy of ±0.3°C. It is also equipped with professional water filtration and purification equipment, which truly realizes a machine with multiple uses, environmental protection and energy-saving.
Advantage Of XLNT-3000 3000W Fiber Laser Cutter Chiller
The cooling capacity is 8500W.
It is equipped with protection functions such as flow alarm, high-temperature water alarm and low-temperature water alarm.
The industrial water cooled chillers are equipped with a deionizing filter to ensure the cleanliness of the laser cooling water circuit.
There are multiple fault detections inside to protect the laser in a normal state, and a signal output port is also equipped.
Specification Of XLNT-3000 3000W Fiber Laser Cutter Chiller
|
Voltage |
220v |
|
|
Frequency |
50hz |
60hz |
|
Current |
4A-17.3A |
|
|
Compressor power |
||
|
Cooling capacity |
24566Btu/h |
23884Btu/h |
|
6192kcal/h |
6020kcal/h |
|
|
Electric assisted power |
400W+1800W |
|
|
Refrigerant |
R-22/R410A |
|
|
Precision |
±0.5℃ |
|
|
Reducer |
Capillary |
|
|
Protection |
Over-current protection for compressor, flow alarm, over-temperature alarm |
|
|
Pump power |
||
|
Tank capacity |
40L |
|
|
Inlet and outlet |
Rp1/2'' + Rp1'' |
|
|
53M |
||
|
70L/MIN |
||
|
95KGS |
||
|
113KGS |
||
|
Product dimension |
78*47*89CM(L*W*H) |
|
|
Packing dimension |
87*60*109CM(L*W*H) |
|
Application Of XLNT-3000 3000W Fiber Laser Cutter Chiller
This chiller for laser machine is suitable for 2000W~3000W fiber laser equipment.
More Details Of XLNT-3000 3000W Fiber Laser Cutter Chiller
On-top Cooling Fan, Ultra-quiet
The Side Panel Wind Tunnel Design, Detachable, Helps Heat Dissipation In All Directions
Equipped With High And Low Temperature Dual Protection
As a leading water chiller system supplier, Xlntchillers provides industrial chiller cw 5200, laser cutter cooling system, laser cooling system, etc. Contact us to buy welding water chiller or know more.
在线联系供应商
Other supplier products
 |
CW6000 Water Chiller For 22KW CNC Spindle | CW6000 Water Chiller is used to cool down the CNC spindle below 22KW. The cooling capacity of CW6000 Water Chiller is 3000W, which can meet the c... |
 |
Fiber Laser Chiller | The fiber laser chiller is used to cool the laser generator and laser lens of the fiber laser cutting machine. Fiber laser machines have become m... |
 |
Chiller CW 5200 For 8KW CNC Spindle | Industrialchiller cw 5200is a small intelligent water chiller, suitable for cooling the spindle of numerical control equipment below 8kw, and used ... |
 |
Welding Fume Extractor | Welding Laser Fume Extractor The welding fume extractoris mainly used to purify the harmful fume and gas generated during metal welding. Welding f... |
 |
Chiller CW 5200 For 8KW CNC Spindle | Chiller CW 5200 For 8KW CNC Spindle Chiller cw 5200 is a small intelligent industrial water chiller, suitable for cooling the spindle of numerical... |
