S&A CW-3000,CW-5000,CW-5200 chiller stock in USA and Europe
S&A CW-3000,CW-5000,CW-5200 chiller stock in USA and Europe
CW-3000,CW-5000 and CW-5200 chiller is produced by S&A company .
S&A CW-3000 series thermolysis type water cooler has compact design, with energy saving, high cost performance, good protection and alarm system. The water temperature of cw-3000 cooler is related to ambient temperature, so it's thermostat is not manually adjusted. It is applied for cooling 80W laser tube or 2*1.5KW CNC spindle.
S&A CW-5000 and CW-5200 chiller both are refrigeration type industrial water chiller, the temperature control in ±0.3℃precision and multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm.
CW-5000 has 800W cooling capacity, it is applied for cooling 100W CO2 laser tube, 5KW spindle or welding equipment, or 5W-10W solid-state laser. You can visit the CW-5000 video:
CW-5000 water chiller parameter:
Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-134a
Pump power: 0.03KW/0.051KW/0.1KW; Tank capacity:6L
Max. lift:10M-25M; Max. flow: 10L/min- 16L/min
N.W: 24Kgs; G.W: 27Kgs; Dimension : 58 X 29 X 47 cm (L X W X H); Packing dimension: 70 X 43 X 58 cm (L X W X H)
S&A brand CW-5200 water cooler’s cooling capacity up to 1.4KW, it is applied for cooling 5W-10W solid-state laser, 5W-10W solid-state laser, 8KW CNC spindle, 50W-75W laser diode, a single15W-30W solid-state laser or a single 30W RF laser tube. You can visit the CW-5200 video:
chiller CW-5200 parameter:
Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-22 / R-134a / R-410a
Pump power: 0.03KW/0.05KW/0.1KW; Tank capacity:6L
Max. lift:10M-25M; Max. flow: 10L/min- 16L/min
N.W: 26Kgs; G.W: 29Kgs;
Dimension : 58 X 29 X 47 cm (L X W X H); Packing dimension: 70 X 43 X 58 cm (L X W X H)
About S&A Brand
S&A(TEYU) was founded in 2002. After 15 years of development, the headquarter covers an area of 18,000 square meters, and has about 250 employees.
Why choose S&A
Product Advantages:1. With 11 patent certificates，CE, RoHS and REACH approval; Conforms to air transport requirements; 2 years warrenty
2.±0.1℃ high precision temperature control, stable cooling performance,support ModBus-485 communication;
3. Establish logistic warehouses at USA and Europe;
Manufacturing Advantages:1.Independent R&D on sheet metal, evaporator, condenser and cores parts of chiller;
2. Anual ouput 60,000 units,product exports rate above 60%；
3. Standard bulk production,standard parts rate up to 80% ；
4. With excellent laboratory testing system, simulates actual working environment for chiller.
CONTACT S&A
;
Website:
TE:;
Other supplier products
All supplier products
Same products
