Air Water Chiller SUNDI -40℃ ～ 200℃ For Two Reactors

• 

Display function

Cooling heating Temperature Control System Display – The Refrigeration system's multi-image displays various information.

How Does the Release Gas?1. When air is released by air separator, the return value of the air separator should be placed in the normal open state to reduce the pressure of the air separator to the suction pressure, and the other valves should be closed.2, Appropriately open mixed gas inlet valve to make the industrial cold water machine 40 ℃ ~ 200 ℃ below zero in mixed gases into the air separator.3. Micro-open feed valve, so that the refrigerant is fed into the air separator to vaporize and absorb heat and cool the mixed gas.4. The rubber hose used to connect the air vent valve interface enables one end to be inserted into the water container. When the refrigerant in the mixture is cooled into ammonia, the air separator is frosted at the bottom of the air separator, and the air valve can be opened slightly and the air is discharged through the water container. If the bubbles in the water rise in the process of the circular without the changing of volume, the water is clear and water temperature is not rising, then the air is released, at this time you should make the appropriate opening of the air valve.5. The coolant in the mixture is gradually condensed into the coolant liquid and deposited at the bottom.The height of the liquid level can be seen from the frosting condition of the shell. When the liquid level reaches 12, close the supply throttle valve and open the return flow throttle valve. The underlying refrigerant liquid is returned to the air separator to cool the mixture. When the bottom layer is about to melt, turn off the return throttle valve to open the supply throttle valve.6. When the air is stopped, the air valve should be closed first to prevent the coolant from leaking, and then the liquid throttle valve and the mixed gas inlet valve shall be closed. The return valve should not be closed to prevent increased pressure in the air release.

Other supplier products

	High-Low Temperature Test Chamber	Performance characteristics of low temperature chamber： ℃, facilitate continuous round-trip experiment was carried out between the high temper...
	Test Chamber	Room environment refers to simulate natural climate environment in the space of valid range test types are: high and low temperature test box, high...
	Lab Water Chiller SUNDI -60℃~300℃	SUNDI -60℃~300℃ A fully closed piping design, high efficiency plate heat exchanger used to reduce the demand for the thermal fluid utilization whil...
	Thermal Shock Test Chamber	High and low temperature impact chamber is a necessary test equipment of material such as metal, plastic, rubber, electronics and so on, used for t...
	Low Temperature Refrigeration Circulator	1. To save water resources, it is possible to use the glycol-water mixture to carry out circulating refrigeration, strict circulation pipeline desi...

Same products

	PanPHE gasketed plate heat exchangers	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanPHE gasketed plate heat exchangersare designed with easy access for regular servicing and for ...
	Large Condensing Hot Water Unit	Seller: Hebei Qintai Thermal Power Equipment Co., Ltd	Large Condensing Hot Water Unit Gas-Fired Hot-Water HeaterProduct Advantages: (1) Using large-s...
	Fully Premixed Condensate Hot Water System	Seller: Hebei Qintai Thermal Power Equipment Co., Ltd	Fully Premixed Condensate Hot Water System The burner used in the equipment adopts the self-deve...
	Fully Premixed Condensate Hot Water System	Seller: Hebei Qintai Thermal Power Equipment Co., Ltd	Fully Premixed Condensate Hot Water System Thisgas-steam thermal generator, combining these tech...
	Fully Premixed Gas-Fired Steam Generator-Smart Version	Seller: Hebei Qintai Thermal Power Equipment Co., Ltd	Fully Premixed Gas-Fired Steam Generator-Smart Version Discover the Smart Version of Qintai&rsqu...