Fluxes for Aluminum Alloy
Granular FluxGeneral Introduction:
SATA granulated fused refining flux is a eutectic salt composed of mgcl2 anhydrous and potassium or sodium chloride. Which can removes alkali metal(sodium, calcium, lithium) and non-metallic inclusions (oxides, borides and carbides) from liquid aluminium and al-alloys. It’s in-furnace metal treatment flux.
The main chemical compositions of different fluxes based on Mgcl2 anhydrous, Kcl, Nacl, CaF2, Na3ALF6, K3ALF6 and etc. These raw materials are fused in a furnace to a high temperature, cooled and crushed. Compare to the powder mixed. Fused fluxes have a single sharp melting point rather than mixed powder flux has a melting range. The melting point belows 483℃. And some are free from fluorides, sodium, which is suitable for high magnesium al-alloy. Some fluxes has a very small amount of calcium fluoride added to MgCl2/KCl flux leads to a significant increase in the inclusion and alkali removal performance. The MgCl2 minimizes or eliminates surface oxidation by creating a thin-film layer on the metal surface, thus cover fluxes can be avoided if the refining flux contains enough MgCl2.
Advantage:
Eco‐friendly flux that reduce dust levels, meet the emission limits of most environmental regulatory agencies
Uniform size, reacts fully. Purify the melt improve melt quality.
Increases the extrusion speed and die life when extruding profiles
Reduces the number of breaks in continuous casting
Sodium-free flux suitable for high mg al-alloy eliminates edge cracks when rolling high Mg aluminium alloys
Free of fluorides. Zero fluoride emissions.
Low melting point for rapid dispersion
Effectively remove the aluminium slag and hydrogen, performance excellent on refining and drossing.
Addition and stirring of flux by means of flux feeder (with Nitrogen or Argon) gives the highest refining efficiency.
In the meanwhile, oxide inclusions can be separated from the melt, and generated dry slag (white dross),reduce metal loss.
Less dosage, high effectiveness, save cost for customer refining and degassing slag, it can protect and clean molten aluminium.
Send product request
Other supplier products
 |
granulated-fused-refining-fluxes | General Introduction: SATA granulated fused refining flux is a eutectic salt composed of mgcl2 anhydrous and potassium or sodium chloride. Which ... |
 |
Demag Flux | In some alloys, magnesium is present only as a permitted impurity within limits, and significant amounts may be detrimental. Demag fluxis applicati... |
|
|
Fluxes for Aluminum Alloy | Granular FluxGeneral Introduction: SATA granulated fused refining flux is a eutectic salt composed of mgcl2 anhydrous and potassium or sodium chlor... |
 |
Aluminium Titanium Boron-Al-Ti-B Grain Refiner | General description of Aluminium Titanium Boron-Al-Ti-B Grain Refiner In casting applications, the control of grain size is very critical in mai... |
 |
Raw Materials | Metallurgical flux coating materialrefers to the material which can separate metal from mineral by forming a low melting point slag layer while int... |
Same products
 |
MECHANIC M35 Flux Paste for Phone Motherboard Repair | Seller: Phonefix | The Mechanic M35 10CC Nano Flux Paste offers 98% new high activity. This high-efficiency, synergi... |
 |
Lanrui AS50 Universal Repair Cream Oxidation Point Remove | Seller: ShenZhen VIP FIXPHONE Technology Co., Ltd, | Description LANRUI AS50 Universal Repair Cream for Mobile Phone/iPhone motherboard oxida... |
 |
Mechanic M35 Nano Soldering Flux Paste for Chip IC Repair | Seller: ShenZhen VIP FIXPHONE Technology Co., Ltd, | Description Mechanic M35 10CC Nano Flux Paste for mobile phone motherboard BGA chip sold... |
 |
MaAnt BGA Solder Paste Halogen-free Lead-free Repair Flux | Seller: Phonefix | MaAnt UP-79 MY-224 MY-225 halogen-free solder paste for mobile phone/electronic circuit board CPU... |
 |
JTX Nano Conductive Silver Paste For Phone Screen Line Circuit Repair | Seller: Phonefix | JTX Nano Conductive Silver Paste repairs iPhone screen/green screen/white screen lines issues cau... |
