Fluxes for Aluminum Alloy

• 
• 

Granular FluxGeneral Introduction:

SATA granulated fused refining flux is a eutectic salt composed of mgcl2 anhydrous and potassium or sodium chloride. Which can removes alkali metal(sodium, calcium, lithium) and non-metallic inclusions (oxides, borides and carbides) from liquid aluminium and al-alloys. It’s in-furnace metal treatment flux.

The main chemical compositions of different fluxes based on Mgcl2 anhydrous, Kcl, Nacl, CaF2, Na3ALF6, K3ALF6 and etc. These raw materials are fused in a furnace to a high temperature, cooled and crushed. Compare to the powder mixed. Fused fluxes have a single sharp melting point rather than mixed powder flux has a melting range. The melting point belows 483℃. And some are free from fluorides, sodium, which is suitable for high magnesium al-alloy. Some fluxes has a very small amount of calcium fluoride added to MgCl2/KCl flux leads to a significant increase in the inclusion and alkali removal performance. The MgCl2 minimizes or eliminates surface oxidation by creating a thin-film layer on the metal surface, thus cover fluxes can be avoided if the refining flux contains enough MgCl2.

Advantage:

Eco‐friendly flux that reduce dust levels, meet the emission limits of most environmental regulatory agencies

Uniform size, reacts fully. Purify the melt improve melt quality.

Increases the extrusion speed and die life when extruding profiles

Reduces the number of breaks in continuous casting

Sodium-free flux suitable for high mg al-alloy eliminates edge cracks when rolling high Mg aluminium alloys

Free of fluorides. Zero fluoride emissions.

Low melting point for rapid dispersion

Effectively remove the aluminium slag and hydrogen, performance excellent on refining and drossing.

Addition and stirring of flux by means of flux feeder (with Nitrogen or Argon) gives the highest refining efficiency.

In the meanwhile, oxide inclusions can be separated from the melt, and generated dry slag (white dross),reduce metal loss.

Less dosage, high effectiveness, save cost for customer refining and degassing slag, it can protect and clean molten aluminium.

Другие товары поставщика

	Reclaimed Fluxes	General Description of Reclaimed Fluxes Reclaimed fluxes is a strongly exothermic flux and used as covering and drossing flux, recovery of grindin...
	Mg Alloy Flux	Magnesium alloyfluxhas a low melting point and small heat capacity. When heated in the air, it gets oxidized fast, and it is easy to burn when over...
	Powder Refining Flux	Powder Refining Flux (SATA-PF-330) General Description of Powder Refining Flux (SATA-PF-330) For aluminium alloys, since the Al has strong chemical...
	Drossing Flux	Drossing Flux (SATA-PF-310) Description of Drossing Flux (SATA-PF-310) SATA drossing fluxis specially developed for removing the slag from the alum...
	Potassium Aluminum Fluoride (PAF)	General Description of Potassium Aluminum Fluoride (PAF) It is also called Potassium Cryolite, Potassium Tetrafluoraluminate, Kalium Aluminium Flu...

Похожие товары

	JTX Nano Conductive Silver Paste For Phone Screen Line Circuit Repair	Продавец: Phonefix	JTX Nano Conductive Silver Paste repairs iPhone screen/green screen/white screen lines issues cau...
	iFixes Solder PasteiFixes Solder Paste 138℃ 158℃ 183℃ 217℃ PCB BGA Chip Flux 138℃ 158℃ 183℃ 217℃ PCB BGA Chip Flux	Продавец: Phonefix	iFixes solder paste is138 is158 is183 is217 conductive silver paste for mobile phone chip repair....
	Synthetic Cryolite	Продавец: JINZHOU SATA FUSED FLUXES AND NEW MATERIALS FACTORY	Synthetic Cryolite General Description ofSynthetic Cryolite Sodium HexafluoroaluminateFormula: Na...
	Sodium Fluosilicate/Hexafluorosilicate (SSF)	Продавец: JINZHOU SATA FUSED FLUXES AND NEW MATERIALS FACTORY	Sodium Fluosilicate/Hexafluorosilicate (SSF) General Description of Sodium Fluosilicate/Hexafluor...
	Raw Materials	Продавец: JINZHOU SATA FUSED FLUXES AND NEW MATERIALS FACTORY	Metallurgical flux coating materialrefers to the material which can separate metal from mineral b...