Weldy Hot Air Gun HG 330-S, 230V/2000W, Car Wrapping Kit

In addition, the WELDY heat gun has two air settings with different strengths. The stronger air setting is mainly used to preheat the vinyl wrap, as a higher volume of hot air is required for this. Weighing only 0.7 kg, installers can wrap for extended periods of time without fatigue when using WELDYs HG 330-S heat gun. Thanks to the ergonomic, two-component handle, the heat gun fits perfectly in the users hand and enables a firm grip. The 5m long cable on the HG 330-S heat gun ensures a larger working radius and makes it easier to work around various vehicles, both small and large. If work breaks are needed, the heat gun can be placed vertically thanks to the two feets that also work as a stand. These are located on the back of its housing. Anyone who wraps cars knows how easily the nozzle can come into contact with the users hands or film. To prevent this, the heat protection is included in the HG 330-S Car Wrap Kit. If the heat gun is placed under the user’s arm or between the legs while working, the air inlet covers ensure adequate air supply. The simple, stepless temperature adjustment is ideal for preheating wrap/films at higher temperatures. It also helps with annealing, a subsequent heat treatment in which the film is heated again so that it retains its shape permanently and prevents it from contracting. As with other WELDY heat guns, a wide range of accessories are also available for the HG 330-S. For example, the practical leather holster (article no. 126.311) to easily and safely hold the heat gun during breaks. In addition, various nozzles are available from Leister for specific jobs: Wide slot nozzles in different sizes (article no. 119.342 50 x 3 mm and article no. 119.341 50 x 5 mm), the tube nozzle (article no. 119.343) as well as the reflector nozzle (article no. 119.344). In short: The HG 330-S Car Wrapping Kit from WELDY is the preferred choice for professional car wrapping.