Deep water Drilling Platform machine use thrust roller M4CT3278 bearing 32x78x110.5mm
Tandem thrust bearingsM4CT3278 are designed to be used in horizontal shaft applications (extruder gear drives) and it is essential that a sufficientthrust load be applied to prevent roller slip. Typically, the minimum load required is expressed as a ratio of the bearing’s dynamic load rating (C)to the applied load (P). Loads representing C/P > 12 must be avoided and loads where C/P falls between 8 and 12 should be avoided.M4CT3278 is 4 stages thrust roller bearing with inner dia:32mm size,outer diameter:78mm ,the height:110.5mm
|
Tandem bearing old code |
Basic size unit(mm) |
Basic load rating Unit (KN) |
|||
|
Inner dia |
Outer dia |
Height |
Cr |
Cor |
|
|
M4CT3278 |
32 |
78 |
321 |
1283 |
|
Send product request
Other supplier products
 |
VLI 200844 N slewing ball bearing 948x 736x56mm stackers machine | Description VLI 200844 Nslewing ball bearing Dimension(ODXIDXH) 948x736x56mm Outer diameter(OD) 948mm Inner diameter(ID) 73... |
 |
food extruder multi-stage bearings M4CT40127 40*127*177mm | Tandem Thrust BearingsM4CT40127can receive heavy load in a limited space and support firmly in the direction of axis and last long with low frictio... |
 |
Large gearbox use thrust roller bearing M7CT25120A 25x120x336mm Non-standard design | The thrust cylindrical roller bearing M7CT25120Awith size 25x120x336mm , the inner diameter:25mm, the outer diameter:120mm, the total height:336mm ... |
 |
High speed rotor bearing Z-537024.ZL for strander machine | The bearings Z-537024.ZL can be lubricated from the end faces using grease or oil.The bearing 537024 lubrication systerm from oil hole and oil gro... |
 |
Plastic extruder gearbox use 8 stages thrust roller bearing | The thrust cylindrical roller bearing M8CT3495 with size 34x95x262mm , the inner diameter:34mm, the outer diameter:95mm, the total height:262mm ... |
Same products
 |
I. 1100.22.00.A slewing bearing, | Seller: JinHang Precision Bearing Co.,LTD | Description I. 1100.22.00.A slewing bearing Outside and Inside diameter tolerances in accordance ... |
 |
I.880.22.00.A slewing bearing, | Seller: JinHang Precision Bearing Co.,LTD | Description I.880.22.00.A slewing bearing Outside and Inside diameter tolerances in accordance wi... |
 |
I. 1000.22.00.A slewing bearing | Seller: JinHang Precision Bearing Co.,LTD | Description I. 1000.22.00.A slewing bearing Outside and Inside diameter tolerances in accordance ... |
 |
I.800.22.00.A slewing bearing supplier | Seller: JinHang Precision Bearing Co.,LTD | Description I.800.22.00.A slewing bearing Outside and Inside diameter tolerances in accordance wi... |
 |
I.700.22.00.A slewing bearing supplier | Seller: JinHang Precision Bearing Co.,LTD | Description I.700.22.00.A slewing bearing Outside and Inside diameter tolerances in accordance wi... |
