深水钻井平台机用推力滚轮M4CT3278轴承32x78x110.5mm
串联推力轴承 M4CT3278 设计用于水平轴应用(挤出机齿轮驱动),必须施加足够的推力载荷以防止滚子滑动。 通常,所需的最小载荷表示为轴承额定动载荷 (C) 与施加载荷 (P) 的比率。 必须避免 C/P > 12 的负载,并且应避免 C/P 介于 8 和 12 之间的负载。 M4CT3278是四级推力滚子轴承,内径:32mm,外径:78mm,高度:110.5mm
串联轴承旧代号 基本尺寸单位(mm) 基本额定载荷
单位(千牛)
内径 外径 高度 Cr Cor
M4CT3278 32 78 110.5 321 1283
在线联系供应商
Other supplier products
precision cylindrical roller bearing 527462 for Steel wire stranding machine | precision cylindrical roller bearing 527462 for Steel wire stranding machine Bearing code 527462 Bearing size Contact Bearing ou... | |
管绞机使用单列圆柱滚子轴承 529599 轴径 1320mm | 轴承代号 529599轴承内径1320mm结构单列圆柱滚子润滑油 高速油润滑轧辊环材料GCr15SiMn滚筒材质GCr15保持架材料黄铜精密级 P5 P6 可用应用 钢丝绳、钢丝绳管绞机交货时间 60 天特点将用于高速管绞机 | |
B7012-E-TVP-P4-UL FAG原装机床主轴轴承,带聚酰胺保持架60x95x18mm | B7012-E-TVP-P4-UL FAG原装机床主轴轴承,带聚酰胺保持架60x95x18mm B7012-E-TVP-P4-UL FAG原装机床主轴轴承,带聚酰胺保持架,尺寸为60x95x18mm,它的精度等级为P4,采用超级钢材料制成。金航精密轴承主要提供主轴轴承,交叉滚子轴承,... | |
541924 cylindrical roller bearing for higher speed tubular strander machine | 541924 cylindrical roller bearing for higher speed tubular strander machine Bearing code 541924 Bearing size Contact Bearing outer... | |
Tubular strander bearing Z-527461.ZL | Single row cylindrical roller bearings Z-527461.ZL with cage can be used at operating temperatures from –30 °C to +150 °C.The bearing... |
Same products
Tubular Stranding machine use bearing 527247 | 卖方: JinHang Precision Bearing Co.,LTD | The cylindrical roller bearings Z527247ZL have high rigidity, high radial load carrying capacity.... | |
Bearing Z-527462.ZL For Control cable tubular strander machine | 卖方: JinHang Precision Bearing Co.,LTD | Single row cylindrical roller bearings Z-527462.ZL with cage are units comprising solid inner and... | |
High speed rotor bearing Z-537024.ZL for strander machine | 卖方: JinHang Precision Bearing Co.,LTD | The bearings Z-537024.ZL can be lubricated from the end faces using grease or oil.The bearing 53... | |
Rotating bearing Stainless steel wire stranding machine 527461 | 卖方: JinHang Precision Bearing Co.,LTD | Single row cylindrical roller bearings Z-527461.ZL with cage can be used at operating temperature... | |
Non-standard tubular strander bearing Z-527460.ZL | 卖方: JinHang Precision Bearing Co.,LTD | Speical roller bearing 527460 have a lubrication groove and three lubrication holes in the outer ... |