Pinion/shaft gears/standard and special spur gears/custom metal gears
Our Department has been working on metal products for more than ten years. We have a wealth of experience in this field. Our foundry, machining, milling, hobbing, wire cutting, heat treatment, electroplating departments constitute a complete production system, can help you solve any processing problems. Our Department can produce according to your sample or drawing. Welcome your consultation and negotiation. The range our department can handle is DP2-DP50.8
Other supplier products
|
|
Melamine Glass Laminated tube/melamine tube/glass laminated tube |
Melamine tubing is made from a higher-strength fine glass fiber woven material and a melamine resin system. It has good arc extinction characterist... |
|
|
Vulcanized Fiber Board, vulcanized fiber coil, steel paperboard |
硫化纤维板由棉纸或高纯度木质纤维素纸制成。纸层用氯化锌处理，然后转移到所需厚度的均匀材料中。然后，将最终产品清洗，干燥，压延并加工以获得最终的化学纯硫化纤维片。根据等级和用途，硫化纤维板的密度范围为1.00 G / CM至1.35 G / CM。它的强度与铝相似，但密度仅为铝的一半。硫化纤维板... |
|
|
Drop fuse |
1. LOW MINIMUM BREAKING CURRENT, low power loss, low arc voltage. 2. High breaking capacity and effective short-circuit expected current limit. 3. ... |
|
|
Current limiting fuse |
Can Be used in a 50 hz indoor system, rated voltage is 3.6 kv, 7.2 kv, 12 KV, 24 kv, 40.5 kv, together with other switching equipment (such as load... |
|
|
Filament wound tube/epoxy glass filament wound tube/fuse tube |
The Epoxy Glass Filament winding tube consists of continuous filaments oriented in the Epoxy Matrix. It is made of fiberglass filaments wound at di... |
All supplier products
Same products
