Automotive Water Intake Manifold Mould
Automotive Water Inlet Manifold Mould
Injecting gas through the nozzle is a typical method used in rod-shaped products, because this method does not require frequent changes to the mold and is versatile, but the disadvantage is that the nozzle needs to be modified and the single-use cost is high, and it lacks flexibility. The method of gas intake through the gas element needs to modify the mold, but it is flexible to use and can be used in combination with multiple processes. There is various Gas-assisted injection mold, which can be divided into the main duct air intake, split runner air intake, cavity air intake, and so on. At present, the most commonly used is air needle air intake, the method is simple in design and convenient to install and disassemble, but it is easy to cause problems such as blockage and unblocked gas path.
As a mold manufacturing company, we will do our best to meet all the needs of customers.
Other supplier products
|
|
Multi Cavity Mold |
The runner filling balance must be considered when designing the multi cavity plastic moldin order to ensure the best effect of filling balance, th... |
|
|
2K Mold |
2KMolds
The rotary mold is composed of two-cavity and core sides, the two core sides are the same, only the cavity sides is different which the ... |
|
|
Overmolding & 2k Molding |
Molding Over Molding& 2k Molding
The same type of material of different colors is usually used for two-color injection molding（or 2k injection... |
|
|
Plastic Switch Mould |
Most of the smart home appliance products are electrical products and need to be connected with strong and weak electricity, most of the inner and ... |
|
|
Water Assisted Injection Mould |
Water Injection Moulding
At this time, if the injection molding machine is allowed to inject the plastic to a certain position to stop the injec... |
All supplier products
Same products
