Gas & Water Assisted Injection Mold
Gas & Water assisted injection molding
Since the thermal conductivity and heat capacity of water are much bigger than nitrogen, so the injection cycle of water-assisted is about 70% shorter than the injection cycle of gas-assisted molding; The product wall thickness of water-assisted injection moldis more even than gas-assisted; The inner wall roughness of water-assisted injection molding is smoother than that gas injection moulding.
GAS & WATER ASSISTED INJECTION MOLD TYPES
TV Frame Mold
Pushing the liquid plastic into the cavity and core side by high pressure during the injection process, and the gas pressure is maintained to form a hollow section inside the thick wall of the plastic part, the injection process is called gas-assisted injection molding.
Bike Frame Mold for Kids
During plastic molding processing, gas-assisted injection molding is abbreviated as GAIM, which is a relatively new molding processing technology, this technology is comprehensively developed on the basis of the design and manufacture of traditional injection molding molds and blow molding molds, and entered the practical stage in the 1990s, gas-assisted injection molding has huge technical application advantages and can produce significant economic benefits.
Car Ceiling Handle Injection Mould
When plastic injection molding, the melt is under the injection pressure and enters the mold cavity, on the same section, the flow rate of each gate is different, the fastest in the middle, the closer to the cavity wall, the slower the flow rate, and it contacts the cavity wall, the speed of the first layer is zero.
Water Assisted Injection Mould
Because the flow rate of the outer layer of the melt is slow and the speed of the inner layer is fast, the inner layer of melt will roll outwards and stick to the mold cavity while advancing.
Engine Coolant Pipe
In the gas-assisted injection molding process, the gas always follows the path with the least flow resistance, from high pressure to low pressure, and flows to the thick wall part, because the temperature of this part is high and the resistance is small.
Plastic Pipe Mold
The booster pressurizes the nitrogen in the low-pressure storage cylinder into workable high-pressure nitrogen, and stores it in the high-pressure nitrogen cylinder, the maximum pressure of the nitrogen can reach 35MPa in the process.
Automotive Water Intake Manifold Mould
Gas injection methods can be divided into two types, one is to inject gas together with the melt through the machine nozzle, and the other is to directly inject gas into the runner or cavity through the gas injection element (gas needle), the latter is divided into single-point intake and multi-point intake.
The differences between water-assisted and gas-assisted molding
Gas-assisted injection molding process
Gas-assisted injection molding is roughly divided into 4 stages: plastic injection, gas injection, pressure-holding cooling, and gas discharge.
Gas-assisted injection molding classification
As one of gas injection moulding manufacturers, we will provide more high quality plastic moulding servicesfor clients, if you have needs, please contact us.
Send product request
Other supplier products
 |
Water Assisted Injection Mould | Water Injection Moulding At this time, if the injection molding machine is allowed to inject the plastic to a certain position to stop the injec... |
 |
Cold Runner & Hot Runner Plastic Mold | Generally, the temperature-sensitive wire is composed of steel wire insulated with a heat-sensitive material, the temperature sensing wire is commo... |
 |
Overmolding & 2k Molding | The same type of material of different colors is usually used for two-color injection overmolding（or 2k injection molding）so that the bonding stren... |
 |
32 Cavity Mold | 32 Cavity Mold In terms of multi-cavity molds, we pay attention to the design of layout and runner filling balance, which is also the key to the s... |
 |
Gas & Water Assisted Injection Mold | Gas Assist Injection Molding Design Guide Since the thermal conductivity and heat capacity of water are much bigger than nitrogen, so the inject... |
Same products
 |
Mold Components | Seller: Packson Mold Co.,Ltd | We provide custom made plastic parts-Sliders, inserts, lifters, blocks, ejector pins, and other m... |
 |
Custom Metal Machining Parts | Seller: Packson Mold Co.,Ltd | Packson provides our customers a various CNC machining services to our customers, including milli... |
 |
Clean Room Injection | Seller: Packson Mold Co.,Ltd | Packson - Medial Injection Moulding Cleanroom Expert Packson specializes in delivering top-notch ... |
 |
Medical Plastic Injection Molding | Seller: Packson Mold Co.,Ltd | Packson - Medical Plastic Injection Molding Expert Packson sets itself apart from other medical i... |
 |
CNC Metal Machining Parts | Seller: Packson Mold Co.,Ltd | Packson is a contract manufacturer specializing in CNC Milling, CNC Turning, CNC Drilling service... |
