Sleigh Axial-flow Pump

Sleigh Axial-flow Pump

For the sleigh submersible axial-flow pump knowledge, may be a lot of friends are still very strange, but for its amazing working ability maybe you have heard

ONE:

Sleigh Axial-flow Pumpintroduction

For the sleigh submersible axial-flow pump knowledge,may be a lot of friends are still very strange,but for its amazing working ability maybe you have heard. The sleigh submersible axial-flow pump is very powerful,during working,its flow canreach 10 to 650 cubic meters per hour,its head range can even reach1500 meters. What makes the sleigh submersible axial-flow pump so powerful?Now we are going to analyze it.

Sleigh submersible axial-flow pump is widely used in all areas of modern industrial production.It can take the underground water to the surface,and also can make full use of river water for modern agricultural irrigation,orfor people living in the plateau region,etc. Before the sleigh submersible axial-flow pump running,the suction tube and the pump are filled with liquid. After turning on the pump,the impeller begin high-speed rotating,at the same time the inside liquid also rotates. Under the action of the centrifugal force,the water in the pump shoot out from the impeller, finally flow out of the pump outlet and out of from the discharge pipe through a series of inside setting. Sleigh submersible axial-flow pump utilizes such a simple physical principleto realize its own value, which provides the power for our human production & life and productivity.

Product name: Sleigh axial-flow pump,Sleigh submersible axial-flow pump, Inclined axial-flow pump, Vertical axial-flow pump

Service life: 20years - 30years

Flow range: 300m³/h-60000 m³/h

Water head range:1m-35m

Power range:15kw-1000kw

Water outlet diameter:350QZB-1200QZB

Motor: dry motor(covered with pure copper wire) dip coating process

Mechanical seal: (double or multiple) adopt domestic first-class brand Sichuan Riji or import brand

Bearings: adopt domestic first-class brand Wafangdian

Impeller: generally adopt 2Cr13 or stainless steel for highly corrosive water quality 304, 316, 316L, etc

Pump shaft: 2Cr13 and other materials, and customized according to the pump type and using condition

Protection equipment: relevant protection can be assembled according to the customer’s required, such as motor winding overheating protection, bearing overheating protection, water inlet protection for oil cavity, water inlet protection for motors, water inlet protection for junction box.

ZhonglanAxial Flow Pumpperformance:

Product use:

it can be used in farmland irrigation and drainage, also in industrial and mining docks, city construction,water supply,water supply and drainage of power station,amusement park.

TWO:

Sleigh axial flow pump: the reasons of sleigh submersible axial flow pumpmechanical seal leakage

The sleigh submersible axial-flow pump mechanical seal leakage may be caused by the abrasion between moving ring surface and static ring surface of mechanical seal, there are 6 reasons for this abrasion:

1. Install too tight: check the moving ring surface and static ring surface of mechanical seal,if there are serious charred and deep blackened traces,and seal rubber hardening or loss of elasticity and other phenomena,this is caused by over-tighting.Solution: adjust the mounting height,pull the spring with a screwdriver after installation of impeller. The spring will reset after the release because of its strong tension.Let it have a distance of 2-4mm

3.Poor water quality with particles: The poor water quality,containing small particles and high content of hydrochloride in the medium causeabrasive materials and wear the mechanical seal plane or strain the surface, and then form groove & ring groove and other phenomenon. Solution: improve water pressure or medium,change the mechanical seal.

5.Cavitation : cavitation corrosion mainly occurs in hot water pumps. Due to the medium is hotwater, steam is produced when the water temperature is too high. The steam in the pipeline enters into the pump chamber and can not be excluded,resulting in water shortageand failure of the seal dry grinding. Solution: installing automatic exhaust valve,change the mechanical seal.

6. ssembly problem: the pump cover may not be mounted flat during the installation,making the shaft and the pump cover are in the non-vertical,which caused the static plane and the moving plane can not meet properly, in a short time after turning on the pump,causeing the pump’s unilateral wear and seepage. Solution:remove it and reinstall it,check if the pump cover is installed flat.

THREE:

The voltage and flow ofZhonglan Sleigh submersible axial-flow pumpare rated. Under this condition, if the pump is continuously operated for 1-2 hours,,the pump running will reach a stable state. The performance test of sleigh submersible axial flow pump starts from the minimum point of power. For mixed flow pumps,axial flow pumps,or whirlpool pumps,the valve should be fully running from the start. That is the difference in the beginning. During the measurement period ,13 measurement points should be taken, and the measurement points should be evenly distributed across the whole performance curve. Each point should be measured at a time interval to ensure that the point reaches a stable state.

According to the professional introduction, from the perspective of measurement of sleigh submersible axial flow pump,”three-phase submersible pump should read three-phase current,input power,power frequency,speed tolerance,water head range and flow value. Single-phase submersible pump for split phase starting and capacitor start motor should read input power, stator main winding current, power frequency,speed tolerance,water head range and flow value, for capacitor running and capacitor start running motor should read input power,stator main winding current and stator assistant winding current,power frequency,speed tolerance,water head range and flow value.”

FOUR:

With the development of electric power technology, there are more and more types of submersible pumps,it is inevitable that submersible pumps vibrate during running.The reason for vibration of sleigh submersible axial-flow pump are as follows:1.Sleigh submersible axial-flow pump rotor is unbalanced in the manufacturing process,pump and pump shaft is at different center,collision and friction occur between rotor and stator. 2.Being used for a long time causewear and aging,impeller loosing, bearing damage or bearing clearance. 3. There are sundries in the pipe inlet and impeller and the foundation of the submersible axial-flow pump is fixed not stable,whichcauseresonance strengthening. 4.While sleigh submersible axial-flow pumpworking to promote the flow,accompaning eddy current and cavitation arise vibration inevitably.It can be seen that sleigh submersible axial-flow pump vibrates is not necessarily a problem,can be checked by above methods.

If you want to know more related products, please click here.

Other supplier products

	Buoy Sewage Pump	Buoy Sewage Pump WQF Buoy sewage pump, the Buoy pump is a replacement product from the traditional extension group, the motor driving the pump is d...
	Buoy submersible pump	Buoy submersible pump Service condition: It is mainly used for carrying water from deep well,it is widely used for farmland irrigation,urban and ru...
	Stainless Steel Sewage Pump	Stainless Steel Sewage Pump Stainless steel sewage pumpbelongs to a centrifugal impurity pump, mainly used for transporting municipal sewage, feces...
	Mid-suction axial-flow pump	Mid-suction axial-flow pump It is mainly applied to the reconstruction of pump station,flood control and drainage,urban flood control pump station...
	Coupling axial-flow pump	Coupling axial-flow pump It is mainly applied to the re-construction of the pump station,flood control and drainage,urban flood control pump stati...

All supplier products

Same products

	Submersible Motor and Pump	Seller: Tianjin Best Faith International Trade Co., Ltd.	QN/QM 6”8”10”12”submersible motor Ritz 1215/2-1218/2-1222/2 su...
	China offer Plunger pump A10VS0-100DR-31R-PPA12N0 for Electric Company	Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD	"China offer Plunger pump A10VS0-100DR-31R-PPA12N0 for Electric CompanySelection of advanced tech...
	40PV-TSP(R) Vertical Slurry Pump	Seller: Shijiazhuang Ruite Pump Co., Ltd	40PV-TSP(R) Vertical Slurry Pump Product Description 40PV-TSP(R) Slurry Pump is ideal for a var...
	12/10ST-TAHR Slurry Pump	Seller: Shijiazhuang Ruite Pump Co., Ltd	12/10ST-TAHR Slurry Pump Product Description The feature frame and cover plates made out of gre...
	China made Guide pin 0069/0070 for power station	Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD	"China made Guide pin 0069/0070 for power stationThe company has a large flow, high discharge pre...