SH Double-suction Pump
Product name:SH Double-suction Pump
Model: Double-suction PumpSH-single-stage
Application:SH-type irrigation pump main parts: pump, pump cover, impeller, shaft, double suction seal rings, bushings, bearings. In addition to the axis of materials for high-quality carbon steel, and its remaining multi-cast iron.
Product overview
SH-single-stage double-suction pump Structure Description:
SH-single-stage double-suction pump inlet and outlet are at the bottom of the pump axis, horizontal axis into a vertical position, the pump casing. In the open, without having to remove the water Maintenance, exhaust pipes and motor ( or other prime mover) as viewed from the direction of the coupling of the pump, water pumps are reverse-inch needle direction. As according to the special order can be changed to cis-inch needle rotation.
SH-type irrigation pump main parts: pump, pump cover, impeller, shaft, double suction seal rings, bushings, bearings. In addition to the axis of materials for high-quality carbon steel, and its remaining multi-cast iron.
Pump and pump cover constitute the studio impeller, in and out of the water flange system mounting vacuum gauge and pressure gauge tube screw out of the water formed with the lower flange drain pipe holes.
Impeller static balance check, with the sleeve nut and sides of the fixed sleeve, its axial position can be adjusted through the sleeve nut, the axial force of the impeller use its leaves are arranged symmetrically balanced, there may be some left The remaining axial force coaxial side of the bearing.
Shaft by two single row radial ball bearing, bearing mounted in bearings at both ends of the pump body, with grease lubrication, double suction seal ring to reduce the water pump pressurized water chamber to drain back to the suction chamber.
SH-single-stage double-suction pump parameters:
Flow rate (Q): 160-18000m3 / h
Head (H): 12-125m
SH-single-stage double suction pump Model significance:
6-SH-6-A
6- pump inlet diameter of 6 inches
SH- horizontal single-stage double-suction pump in the open water
6- pump specific speed of 1/10 rounding
A- impeller diameter cutting code
SH type in a pump assembly, disassembly and installation
Assembly and disassembly
1, the assembly of the rotor components: turn the impeller, shaft sleeve, sleeve nut, packing sleeve, packing rings, packing gland, retaining ring, bearing member mounted on the shaft, and put double suction seal rings, then install coupling.
2, the rotor assembly is mounted on the pump, adjust the axial position of the impeller of the halo to the middle on both sides of double suction seal ring to be fixed, the bearing body gland with fixing screws.
3, loading on the packing, put away the glossy paper pad open, cover the pump cover matter pintail pin, tighten the pump cover nut, finally installed Shangfen gland material. But do not be packing too tight, tight packing sleeve will heat, power consumption is large, but also not to cut too loose, too loose will make large liquid leakage, reducing pump efficiency.
After the assembly, the shaft is rotated by hand, no collision phenomenon, rotated relatively light evenly slippery, disassembly can be said assembly sequence contrary.
Installation
1. Check the pump and motor should be no damage.
2, pump installation height, plus hydraulic suction line losses, and its speed can not be greater than the allowable value of the sample suction on the vacuum height regulations. Base size should be consistent dimensions pump unit.
| type | flow Q |
Range H |
Rotational speed n |
Shaft power Pa |
Electric motor | Efficiency n |
Steam eclipse amount | Impeller diameter | Imported caliber | Outlet diameter | Weight | ||
| m3/h | L/s | m | r/min | kw | Powerkw | type | % | m | mm | mm | mm | kg | |
| 6SH-6 | 126 160 198 |
35 44.4 55 |
84 78 70 |
2950 | 40 45.3 51 |
55 | Y250M-2 | 72 75 74 |
5.9 | 0 | 150 | 100 | 150 |
| 6SH-6A | 112 144 180 |
31 40 50 |
67 62 55 |
2950 | 29.6 33.3 38.5 |
45 | Y225M-2 | 68 72 70 |
5.9 | 0 | 150 | 100 | 150 |
| 6SH-9 | 130 160 220 |
36.1 44.4 61.1 |
52 50 40 |
2950 | 25.3 27.3 21.1 |
37 | Y200L2-2 | 72.9 80 77.2 |
3.9 | 0 | 150 | 100 | 130 |
| 6SH-9A | 112 144 180 |
31.1 40 50 |
44 40 35 |
2950 | 18.5 20.9 24.5 |
30 | Y250L1-2 | 72.5 75 70 |
3.9 | 0 | 150 | 100 | 130 |
| 6SH-9B | 108 133 160 |
30 36.9 44.4 |
38 36 32 |
2950 | 17.2 18.6 19.4 |
22 | Y180M-2 | 65 70 72 |
3.9 | 0 | 150 | 100 | 130 |
| 8SH-6 | 183 280 324 |
50.8 77.8 90 |
103 95 87 |
2950 | 83.1 91.7 100 |
110 | Y315S-2 | 62 79.2 76.8 |
5.3 | 0 | 200 | 125 | 309 |
| 8SH-6A | 176 270 310 |
48.9 75 86.1 |
82 75 68 |
2950 | 57.8 73.5 77.6 |
90 | Y280M-2 | 68 75 74 |
5.3 | 0 | 200 | 125 | 309 |
| 8SH-9 | 216 280 351 |
60 77.8 97.5 |
69 63 50 |
2950 | 55.1 59.3 67.8 |
75 | Y250S-2 | 73.7 81 70.5 |
5.4 | 0 | 200 | 150 | 230 |
| 8SH-9A | 180 270 324 |
50 75 90 |
54.5 46 37.5 |
2950 | 41.4 48.3 50.9 |
55 | Y250M-2 | 65 7 65 |
5.4 | 0 | 200 | 150 | 230 |
| 8SH-13 | 216 280 342 |
60 77.8 95 |
48 42 35 |
2950 | 34.9 37.7 40.2 |
55 | Y250M-2 | 81 85 81 |
5.4 | 0 | 200 | 150 | 200 |
| 8SH-13A | 198 270 310 |
55 75 86.1 |
43 36 31 |
2950 | 30.5 33.1 34.5 |
37 | Y200L2-2 | 76 80 76 |
5.4 | 0 | 200 | 150 | 200 |
| 10SH-6 | 360 485 612 |
100 134.7 170 |
71 65 56 |
1450 | 92.8 108.7 129.6 |
132 | Y315M-4 | 75 79 72 |
3.0 | 0 | 250 | 150 | 831 |
| 10SH-6A | 338 462 535 |
93.9 128.3 148.6 |
60 53 49 |
1450 | 73.6 84.4 95.2 |
110 | Y315S-4 | 75 77 75 |
3.0 | 0 | 250 | 150 | 831 |
| 10SH-9 | 360 485 612 |
100 134.7 170 |
42.5 39 32.5 |
1450 | 54.8 62.1 68.6 |
75 | Y280S-4 | 76 83 79 |
3.2 | 0 | 250 | 200 | 620 |
| 10SH-9A | 324 468 576 |
90 130 160 |
35.5 30.5 25 |
1450 | 42.3 49.2 50.9 |
55 | Y250M-4 | 74 79 77 |
3.2 | 0 | 250 | 200 | 620 |
| 10SH-13 | 360 485 576 |
100 134.7 160 |
27 24 19 |
1450 | 33.1 36.9 36.3 |
55 | Y250M-4 | 80 86 82 |
3.5 | 0 | 250 | 200 | 580 |
| 10SH-13A | 342 414 482 |
95 115 134 |
22.2 20.3 17.4 |
1450 | 25.8 27.6 28.6 |
30 | Y200L-4 | 80 83 80 |
3.5 | 0 | 250 | 200 | 580 |
| 10SH-19 | 360 485 576 |
100 134.7 160 |
17.5 14 11 |
1450 | 21.4 21.7 22.1 |
30 | Y200L-4 | 80 85 78 |
3.8 | 0 | 250 | 200 | 520 |
| 10SH-19A | 320 430 504 |
89 119.4 140 |
13.7 11 8.6 |
1450 | 15.4 15.8 15.5 |
22 | Y180L-4 | 78 82 75 |
3.8 | 0 | 250 | 200 | 520 |
| 12SH-6 | 590 790 936 |
164 219 260 |
93 90 82 |
1450 | 202 242 279 |
315 | Y355L2-4 | 74 80 75 |
5.8 | 0 | 300 | 200 | 1056 |
M Slurry Pump China/factory/supplier/manufacturer,Dredge pump China/factory/supplier/manufacturer,ZGB slurry pump China/factory/supplier/manufacturer,ZJL Slurry pump China/factory/supplier/manufacturer,ZJ slurry pump China/factory/supplier/manufacturer,SPR slurry pump China/factory/supplier/manufacturer,FY SLURRY PUMP China/factory/supplier/manufacturer,AH、slurry pump,SP slurry pump,Gravel pump,PNL Mud Pump,PN type pump,DT Desulfurization pumps,TL desulfurization pump,Desulfurization pumps China/factory/supplier/manufacturer,ISG Sewage pumps China/factory/supplier/manufacturer,PWL Sewage pumps China/factory/supplier/manufacturer,PW Sewage pumps China/factory/supplier/manufacturer,WG Sewage pumps China/factory/supplier/manufacturer,WGF Sewage pumps China/factory/supplier/manufacturer,ISZ Centrifugal Pump China/factory/supplier/manufacturer,GC Centrifugal Pump China/factory/supplier/manufacturer,IS Centrifugal Pump China/factory/supplier/manufacturer,AY-type oil pump China/factory/supplier/manufacturer,WX Vortex pump China/factory/supplier/manufacturer,DL multi-stage pump,DG Centrifugal Pump China/factory/supplier/manufacturer,KWP Centrifugal pump,XBD Vertical fire pump,LG vertical multistage pumps China/factory/supplier/manufacturer,IH chemical pump China/factory/supplier/manufacturer,AFB, FB pump China/factory/supplier/manufacturer,N Condensate pump,SH double-suction pump,S-type single-stage double-suction pump,FS Series Forth pump,SZ series vacuum pump China/factory/supplier/manufacturer,SK series vacuum pump China/factory/supplier/manufacturer,PNJ type rubber lined pump China/factory/supplier/manufacturer,LXL Pulp pump China/factory/supplier/manufacturer,ZHJ Type Single-end Mechanical Seal China/factory/supplier/manufacturer,ZHJ Type Mechanical Seal China/factory/supplier/manufacturer
Shi jia zhuang Bojin pump co.,ltd
Contact: Johnny
Address: No.266 Tianshan Street Shijiazhuang,Hebei Province,China
Tel:
Mobile:
Website:
E-mail:
Postal Code: 050035
Send product request
Other supplier products
 |
SK-series Vacuum Pump | Product name:SSK-series Vacuum Pump Model:SK-series Vacuum Pump Application:SK series water ring vacuum pumps and compressors are widely used in ... |
 |
LXL Pulp Pump | Product name:LXL Pulp Pump Model:LXL Pulp Pump Application:safe and reliable, reducing maintenance costs, through a balance check of rotor compon... |
 |
AH Slurry Pump | Product name:AH Slurry Pump Model:AH Slurry Pump Application:Used in metallurgy, mining, coal, electricity, building materials and other industri... |
 |
Dredge pump | Product name:Dredge pump Model:Dredge pump Application:mainly by the pump head, mud pump special reduction gear box, high elastic coupling, marin... |
 |
Gravel Pump | Product overview SG (or GH) type gravel pump is mainly used for the continuous conveying granular too big material strong abrasive slurry pump can... |
Same products
 |
Yoyik offer Thrust disk ALD320-20X2 for power station | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Yoyik offer Thrust disk ALD320-20X2 for power stationMain: hydraulic machinery and components, h... |
 |
China offer Aperture gland ALD320-20X2 for Electric Company | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China offer Aperture gland ALD320-20X2 for Electric CompanyDongfang Yoyik perennial supply spare... |
 |
Yoyik offer Throttling ring DLD320-20X2 for power generation | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Yoyik offer Throttling ring DLD320-20X2 for power generationDongfang Yoyik has been focused on m... |
 |
China Supplier Aperture gland DLD320-20X2 for steam turbine | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China Supplier Aperture gland DLD320-20X2 for steam turbineDeyang YOYIK have power plant profess... |
 |
Fluidic Connections | Seller: Nanjing Runze Fluid Control Equipment Co.,Ltd | Fluidic Connections Fluidic Connections were manufactured from molds and injection machines by a... |
