API610 VS1 vertical, single-stage or multi-stage single suction heads, centrifugal pump

• 

API610 VS1 vertical, single-stage or multi-stage single suction heads, centrifugal pump

API 610 Standard Pump

multi-stage centrifugal pump,single-stage centrifugal pump

Overview

SVL series pump is vertical, single-stage or multi-stage single suction heads, centrifugal pump for conveying a variety of clean or slightly polluted, low temperature or high temperature, chemically neutral or corrosive liquids, especially suitable for conveying flammable and explosive, toxic, volatile, low temperature medium.

The SVL series pumps conform to the API 610 10th/API 610 11th design standards of the American Petroleum Institute.

Performance scope

The temperature of T:-15 DEG ~+85 DEG

The pressure P: ~ 3.6MPa

The flow of Q:20 ~ 1500m3/h

The head of H: 300m

Application scope

It is mainly used in oil refineries, petrochemical industry, low temperature engineering, LPG light hydrocarbon conveying station, power plant, offshore oil production platform and so on. It is especially suitable for transporting liquefied gas, methane, ethane, ethylene, propylene and so on.

Structural characteristics

SVL series vertical pumps are multilevel and radial split. The impeller is generally suction impeller. The axial force is borne by the centripetal thrust ball bearing. When the pressure difference is increased, the balance drum device is used to balance the axial force. Bearing lubrication is lubricated with thin oil, with an independent internal circulation automatic lubrication system. The hydrodynamic journal bearing is located at the inlet of the pump. In a certain depth of installation of the pump, the pump shaft has the position of the middle suction pipe and the discharge pipe in the upper part of the flange, which is 180 degrees to each other. From the driver side, the pump is revolving counter clockwise, and it can also be made according to the requirements of the customer.

- material

The main materials are: S-3, S-5, S-6, S-8, S-9, C-6, A-7, A-8, D-1, D-2, etc., and can also be used in other materials.

- seal

All arrangement and system of API682 can be selected.

Other supplier products

	IHF PTFE TEFLON Lined Pump	IHF PTFE TEFLON Lined Pump No API610 Chemical Pump PTFE TEFLON Lined Pump Specifications: 1.IHFPTFE TEFLON lined pumpto handle various acid,alka...
	API610 OH1 foot mounting Cantilever single stage chemical/oil pump	API610 OH1 foot mounting Cantilever single stage chemical/oil pump API 610 Standard Pump API610 VS4 vertical single centrifugal pump Overview S...
	Sand Gravel Pump	Sand Gravel Pump Product Description TNGSeriesIntroduction:TNGseriesissinglecasinghorizontalslurrypumpandalsonamedasgravelpump,sandpumpand dredg...
	TQN Light Duty Slurry Pumps	TQN Light Duty Slurry Pumps Slurry Pump Light Duty Slurry Pumps, power plant slurry pump，Ceramics Slurry pump Overview TQN/TQNF series pump...
	TDT Desulphurization Pump/FGD Pump	TDT Desulphurization Pump/FGD Pump Slurry Pump TDT Desulphurization Pump manufacturer,50B-L slurry pump TDT、TDTL(R)series FGD pump is single s...

Same products

	Gr400 Pneumatic Conveying Equipment/Pneumatic High Pressure Conveying Equipment	Seller: Greentech International (Zhangqiu) Co., Ltd	Cast Iron Blow Through Airlock Valve Positive Rotary FeederRotary airlocks displace bulk solids f...
	Slurry Pump Impeller	Seller: Shijiazhuang Industrial Pump Factory Co., Ltd.	Ais a rotating component of athat accelerates fluid outward from the center of rotation, thus tra...
	Vertical foam pump Warman foam pump	Seller: Sunbo Machinery	The SF foam pump is robustly constructed, designed for continuous pumping of highly abrasive and ...
	Horizontal Froth Pump Warman	Seller: Sunbo Machinery	The SAHF Horizontal Froth Slurry Pumpis pumping slurry with obstinate froth, which is equivalent ...
	SPR Vertical Slurry Pump Parts Casing Impeller FPL	Seller: Sunbo Machinery	The SV(R) series Vertival slurry pumpparts is equivalent to warman SP slurry pump parts, which is...