API610 VS1 vertical, single-stage or multi-stage single suction heads, centrifugal pump
API610 VS1 vertical, single-stage or multi-stage single suction heads, centrifugal pump
API 610 Standard Pump
multi-stage centrifugal pump,single-stage centrifugal pump
Overview
SVL series pump is vertical, single-stage or multi-stage single suction heads, centrifugal pump for conveying a variety of clean or slightly polluted, low temperature or high temperature, chemically neutral or corrosive liquids, especially suitable for conveying flammable and explosive, toxic, volatile, low temperature medium.
The SVL series pumps conform to the API 610 10th/API 610 11th design standards of the American Petroleum Institute.
Performance scope
The temperature of T:-15 DEG ~+85 DEG
The pressure P: ~ 3.6MPa
The flow of Q:20 ~ 1500m3/h
The head of H: 300m
Application scope
It is mainly used in oil refineries, petrochemical industry, low temperature engineering, LPG light hydrocarbon conveying station, power plant, offshore oil production platform and so on. It is especially suitable for transporting liquefied gas, methane, ethane, ethylene, propylene and so on.
Structural characteristics
SVL series vertical pumps are multilevel and radial split. The impeller is generally suction impeller. The axial force is borne by the centripetal thrust ball bearing. When the pressure difference is increased, the balance drum device is used to balance the axial force. Bearing lubrication is lubricated with thin oil, with an independent internal circulation automatic lubrication system. The hydrodynamic journal bearing is located at the inlet of the pump. In a certain depth of installation of the pump, the pump shaft has the position of the middle suction pipe and the discharge pipe in the upper part of the flange, which is 180 degrees to each other. From the driver side, the pump is revolving counter clockwise, and it can also be made according to the requirements of the customer.
- material
The main materials are: S-3, S-5, S-6, S-8, S-9, C-6, A-7, A-8, D-1, D-2, etc., and can also be used in other materials.
- seal
All arrangement and system of API682 can be selected.
在线联系供应商
Other supplier products
WQ Submersible Sewage Pump | WQ Submersible Sewage Pump Submersible Pump Large Flow Submersible Pump WQ submersible sewage pump is non-clogging sewage pump developed on the ... | |
Sand Gravel Pump | Sand Gravel Pump Product Description TNGSeriesIntroduction:TNGseriesissinglecasinghorizontalslurrypumpandalsonamedasgravelpump,sandpumpand dredg... | |
TNH Heavy Duty Slurry Pump,Silicon nitride ceramics | TNH Heavy Duty Slurry Pump,Silicon nitride ceramics Overview TNH/TFN series pumps are horizontal cantilevercentrifugal pump. The material of TNH... | |
Vertical Long Shaft Pump | Vertical Long Shaft Pump Submersible Pump Application: This series pumps are used to transfer clear water, rain water, water in iron sheet pit... | |
IHF PTFE TEFLON Lined Pump | IHF PTFE TEFLON Lined Pump No API610 Chemical Pump PTFE TEFLON Lined Pump Specifications: 1.IHFPTFE TEFLON lined pumpto handle various acid,alka... |
Same products
China made Guide vane sleeve HPT for power generation | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China made Guide vane sleeve HPT for power generationThe use of advanced technology, absolutely ... | |
China supply Guide vane DG for | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China supply Guide vane DG for turbine generator Deyang YOYIK skill is strong, the production of... | |
LEFOO AIR COMPRESSOR CUT OFF SWITCH | 卖方: LEFOO INDUSTRIAL CO.,LTD. | Air Compressor Cut Off Switch Pressure Range: 15~60psi / 40~250psi / 400~500 psi Stable and acc... | |
Lefoo 115VAC RO Diaphragm Booster Pump | 卖方: LEFOO INDUSTRIAL CO.,LTD. | Low vibration and low noise, self-priming and stable pressure feeding, LEFOO 115VAC RO Diaphragm ... | |
LEFOO BRUSHLESS RO BOOSTER PUMP | 卖方: LEFOO INDUSTRIAL CO.,LTD. | This brushless RO booster pump series is powered by a permanent magnet brushless motor, 0.5/0.7 M... |