ZX series self-priming pump
ZX series self-priming pump
ZX series chemical self-priming pumpis based on the relevant technical information from domestic and overseas by adsorption, digestion, improved from development of energy-saving pump. It has several characters which include a compact structure, easy operation, smooth operation, easy maintenance, high efficiency, long life, and have strong self-absorption capacity and so on.No need to install the pipe end of the valve, before work just to ensure that there is quantitative pump priming can be.So it simplifield the piping system, and improved the working conditions.
Parameters
Flow rate: Q= 8～80 （m³/h）
Total head: H=10～80 (m)
Pump speed: n=1450/2900rpm
Design temperature: T=-20～90℃
Fluid s.g.: γ≤1.3
Pump diameter: 50～350mm
ZGPV self-priming pumpFeatures
Solids Handling Impeller
Two-vane, semi-open, solids handling impeller handles up to 3" (76 mm) diameter solids, depending on pump model. Pump out vanes on impeller shroud reduce foreign material buildup behind impeller and reduce pressure on seal and bearings for extended pump life.
Exclusive Abrasion-Resistant Seal
Exclusive double-floating, self-aligning oil lubricated mechanical cartridge seal with stationary and rotating face of silicon carbide is specifically designed for abrasive industrial waste water service.
Removable Cover Plate
Removable cover plate provides quick and easy access to pump interior without disconnecting piping. Clogs can be removed and pump returned to service in minutes. Impeller, seal, wear plate and flap valve can also be accessed through cover plate opening for inspection or service.
Replaceable Wear plate
ZW Series pumps feature replaceable wear plates which fasten to the cover plate and can easily be removed for inspection or service. No expensive castings to replace.
Removable Rotating Assembly
Removal of rotating assembly allows easy inspection of pump shaft or bearings without disturbing pump casing or piping. On most models, simply remove four bolts from the back of the pump and the rotating assembly slides out.
Drive Variations
ZW Series Pumps are available as basic units for connection to customers' power source or may be flex-coupled or V-belt driven by an electric motor. Pumps may also be powered by gasoline or diesel engines. Electric motor driven pumps with "standby" engine power are also available.
MOC
|
Descripition |
Material |
|||||
|
CI |
Cast steel |
Stainless steel |
||||
|
China standard |
ASTM standard |
China standard |
ASTM standard |
|||
|
1 |
Pump casing |
CS |
WCA WCB WCC |
ZG1Cr13 ZG2Cr13 ZG00Cr18Ni10 ZG0Cr18Ni9 ZG0Cr18Ni12Mo2Ti ZG0Cr17Ni4CuNb ZG1Cr18Ni9 ZG1Cr18Ni9Ti ZG00Cr17Ni14Mo2 0Cr26Ni5Mo2 0Cr17Mn13Mo2N 00Cr18Ni5Mo3Si2 |
CA-15 CA-15M CF-3(SS304L) CF-8(SS304) CF-8M(SS316) CF-3M(SS316L) CN-7M(SS320) CD-4MCu 2205 |
|
|
2 |
Sealing ring |
|||||
|
3 |
Impeller |
|||||
|
4 |
Pump cover |
|||||
|
5 |
Shaft |
Carbon steel, SS420, 2205, SS304, SS316 |
||||
|
6 |
Shaft sleeve |
SS304, SS316,SS316L, CD4MCu, 2205 |
||||
|
7 |
Sealing cover |
SS304, SS316, SS316L, CD4MCu, 2205 |
||||
|
8 |
Bearing housing |
Cast iron |
||||
|
9 |
O-rings |
Oil-resistent rubber |
||||
ZGPV self-priming pumpApplication
1 Municipal engineering, waste water treatment, constructional engineering
self-priming pump manufacturer: Sichuan Zigong Pump & Valve Co., Ltd.
Visit company website:
Send product request
Other supplier products
 |
Stainless Steel SS304 Anti-corrosion Pulp Pump with open impeller | Brief introduction: HZ series chemical process pump including HZ(closed impeller type), HZJ(semi-open impeller type) and HZQ(fully-open impeller ty... |
 |
Three screw pump | Three screw pump The 3GR type three-screw pumpis a rotor type positive displacement pump. The principle is that the primary and secondary moving s... |
 |
Single Stage End Suction Centrifugal Nickel Pump for Strong Alkali/Strong Caustic Soda | Brief introduction: HZ series chemical process pump including HZ(closed impeller type), HZJ(semi-open impeller type) and HZQ(fully-open impeller ty... |
 |
Titanium Centrifugal Pump corrosion resistance pump | Brief introduction: HZ series chemical process pump including HZ(closed impeller type), HZJ(semi-open impeller type) and HZQ(fully-open impeller ty... |
|
|
ZX series self-priming pump | ZX series self-priming pump ZX series chemical self-priming pumpis based on the relevant technical information from domestic and overseas by adsorp... |
