SiC Mechanical Seal
Silicon carbide (SiC) is also known as carborundum, which is made of quartz sand, petroleum coke (or coal coke), wood chips (which need to be added when producing green silicon carbide) and so on. Silicon carbide also has a rare mineral in nature, mulberry. In contemporary C, N, B and other non-oxide high technology refractory raw materials, silicon carbide is one of the most widely used and economical materials, which can be called gold steel sand or refractory sand. At present, China's industrial production of silicon carbide is divided into black silicon carbide and green silicon carbide, both of which are hexagonal crystals with a proportion of 3.20 ~ 3.25 and microhardness of 2840 ~ 3320kg/mm2.
Silicon carbide products are classified into many kinds according to different application environment. It is generally used more mechanically. For example, silicon carbide is ideal material for SiC mechanical sealbecause of its good chemical corrosion resistance, high strength, high hardness, good wear resistance, small friction coefficient and high temperature resistance. SiC Sealrings can be divided into static ring, moving ring, flat ring and so on. SiC silicon cab be made into various carbide products, such as silicon carbide, silicon carbide, silicon carbide ring and so on, according to the special requirements of customers. It can also be used in combination with graphite material, and its friction coefficient is smaller than alumina ceramic and hard alloy, so it can be used in high PV value, especially in the condition of strong acid and strong alkali.
The following tables introduce R-SiC and S-SiC.
|
properties |
R-SiC |
S-SiC |
|
Porosity (%) |
≤0.3 |
≤0.2 |
|
Density (g/cm3) |
||
|
Hardness |
110~125 (HS) |
2800 (kg/mm2) |
|
Elastic Modulus (Gpa) |
≥400 |
≥410 |
|
SiC Content (%) |
≥85% |
≥99% |
|
Si Content (%) |
≤15% |
|
|
Bend Strength (Mpa) |
≥350 |
450 |
|
Compressive Strength (kg/mm2) |
≥2200 |
3900 |
|
Coefficient of heat expansion (1/℃) |
||
|
Heat resistance (in the atmosphere) (℃) |
1300 |
1600 |
|
Test Environment |
Corrosive Weight Loss (mg/cm2yr) |
||
|
Concentration Reagent (wt%) |
Temperature (℃) |
R-SIC |
S-SIC |
|
98%H2S04 |
100 |
50 |
|
|
50% NaOH |
100 |
1000 |
|
|
53% HF |
100 |
7 |
|
|
85% H3P04 |
100 |
8 |
|
|
70% HNO3 |
100 |
||
|
45% KOH |
100 |
1000 |
|
|
25% HCL |
100 |
||
|
10% HF plus 57% HNO3 |
25 |
1000 |
|
Sealconis a china pump supplier,we provide silicon carbide mechanical seal,silicon carbide seal rings,silicon carbide pump sealsand silicon carbide seal.
Send product request
Other supplier products
 |
MECHANICAL SEALS FOR PUMP | Mechanical shaft seal for water pump is a kind of dynamic seal assembly, which is widely used on the rotating shaft. It is also known as the end se... |
 |
Carbon Seal | Carbon shaft sealhas a long history. Graphite is an isoform of element carbon. In 1971, the United States studied the successful flexible graphite ... |
 |
Stainless Steel Seal | Stainless Steel is short for stainless acid resistant steel. It is called Stainless Steel with weak corrosive medium or Stainless Steel, such as ai... |
 |
SiC Mechanical Seal | SiC Mechanical Seal Silicon carbide products are classified into many kinds according to different application environment. It is generally used m... |
 |
Seal Spare Parts Spring | Introduction ofSeal Springs For a mechanical seal, the initial closing force ensures that the seal will function properly from startup. In end- or ... |
Same products
 |
Zbk03 Series Roots Vacuum Pump/Roots Pump | Seller: Greentech International (Zhangqiu) Co., Ltd | ZBK series roots vacuum pump is a kind of coarse vacuum acquisition of equipment, it is widely us... |
 |
"Brand Assurance Globe valve GR2-0-KB-G5/30X48 for power generation | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Brand Assurance Globe valve GR2-0-KB-G5/30X48 for power generation YOYIK is a large number of st... |
 |
Wear Resistance Electric stop valve NKJ961Y-16C for thermal power plant | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Wear Resistance Electric stop valve NKJ961Y-16C for thermal power plant YOYIK professional produ... |
 |
Brand Assurance Stop valve J61Y-600CL for power generation | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Brand Assurance Stop valve J61Y-600CL for power generation YOYIK is a large number of steam turb... |
 |
JWSP-1 Oil Sampling Pumps | Seller: Shenzhen Joinwe Smart Co.,Ltd | JWSP-1 Oil Sampling Pumpis made of imported PA material, 303 stainless steel and 6061 aluminum al... |
