SiC Mechanical Seal

Silicon carbide (SiC) is also known as carborundum, which is made of quartz sand, petroleum coke (or coal coke), wood chips (which need to be added when producing green silicon carbide) and so on. Silicon carbide also has a rare mineral in nature, mulberry. In contemporary C, N, B and other non-oxide high technology refractory raw materials, silicon carbide is one of the most widely used and economical materials, which can be called gold steel sand or refractory sand. At present, China's industrial production of silicon carbide is divided into black silicon carbide and green silicon carbide, both of which are hexagonal crystals with a proportion of 3.20 ~ 3.25 and microhardness of 2840 ~ 3320kg/mm2.

Silicon carbide products are classified into many kinds according to different application environment. It is generally used more mechanically. For example, silicon carbide is ideal material for SiC mechanical sealbecause of its good chemical corrosion resistance, high strength, high hardness, good wear resistance, small friction coefficient and high temperature resistance. SiC Sealrings can be divided into static ring, moving ring, flat ring and so on. SiC silicon cab be made into various carbide products, such as silicon carbide, silicon carbide, silicon carbide ring and so on, according to the special requirements of customers. It can also be used in combination with graphite material, and its friction coefficient is smaller than alumina ceramic and hard alloy, so it can be used in high PV value, especially in the condition of strong acid and strong alkali.

The following tables introduce R-SiC and S-SiC.

properties	R-SiC	S-SiC
Porosity (%)	≤0.3	≤0.2
Density (g/cm3)
Hardness	110~125 (HS)	2800 (kg/mm2)
Elastic Modulus (Gpa)	≥400	≥410
SiC Content (%)	≥85%	≥99%
Si Content (%)	≤15%
Bend Strength (Mpa)	≥350	450
Compressive Strength (kg/mm2)	≥2200	3900
Coefficient of heat expansion (1/℃)
Heat resistance (in the atmosphere) (℃)	1300	1600

Test Environment		Corrosive Weight Loss (mg/cm2yr)
Concentration Reagent (wt%)	Temperature (℃)	R-SIC	S-SIC
98%H2S04	100	50
50% NaOH	100	1000
53% HF	100	7
85% H3P04	100	8
70% HNO3	100
45% KOH	100	1000
25% HCL	100
10% HF plus 57% HNO3	25	1000

Sealconis a china pump supplier,we provide silicon carbide mechanical seal,silicon carbide seal rings,silicon carbide pump sealsand silicon carbide seal.

Other supplier products

	Flygt Mechanical Seals FKU-35	Hangzhou Sealcon Fluid Machinery CO., Ltdwas established in 2011, with Sealcon trademark we specialized in high quality mechanical sealdesign, manu...
	PTFE Seal	Polytetrafluoroethylene (PTFE), also known as teflon/teflon or plastic king, is a copolymer of tetrafluoroethylene monomer. First, it was developed...
	Flygt Mechanical Seals FEU-22	Replacement for: FEU-22 upper parts for flygt 2070 pump FEU-22 upper parts for flygt 2102-40 pump FEU-22 upper parts for flygt 3082 pump Featur...
	MECHANICAL SEALS	What are mechanical seals (End-face Mechianical Seal)? Also known as a face seal, the mechanical seal is a rotary machine shaft seal device, refers...
	Pump Spare Parts	Pump body:including suction chamber and the pressure chamber,water pump spare partsSuction chamber:its function is to allow the liquid to flow even...

供应产品

Same products

	OEM 定制卧式 LB 系列冰箱润滑油齿轮泵	卖方: 河北盛辉泵业	LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结...
	OEM 定制卧式 LB 系列冰箱润滑油齿轮泵	卖方: 河北盛辉泵业	LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结...
	新款 YHCB 系列可移动卧式圆弧齿轮输油泵	卖方: 河北盛辉泵业	YHCB 系列圆弧齿轮泵专为输送高粘度流体（如油、树脂和化学溶液）而设计。这些泵广泛应用于需要精确可靠地处理流体的行业，包括石化、食品加工和制药行业。它们设计坚固、流量控制精确、易于维护，是需要...
	便携式WCB系列不锈钢高粘度柴油齿轮输送泵	卖方: 河北盛辉泵业	WCB齿轮油泵重量轻，体积小，携带移动方便。结构采用联轴器与介质隔离，联轴器单独润滑，齿轮采用合金钢，采用特殊的热加工工艺，表面硬度可达HRC60以上，耐磨性强，使用寿命长。与其它普通型泵相比，...
	库存 ZYB 系列不锈钢废重油输送高压齿轮泵	卖方: 河北盛辉泵业	ZYB系列废油泵用于抽送温度不高于200℃，粘度不大于150mm2/S含有非金属杂质的重油、柴油、煤焦油及粮油、化工、建材、日化等产品中的杂质。本机采用自密封润滑设计，间隙自动调整结构，零件采用...