PTFE WEDGE MECHANICAL SEALS
China-Sealcon is committed to providing the best service and products in fluid industry. And Sealcon's PTFE Wedge Mechanical Seals can replace the mechanical seals produced by John Crane and Burgmann and be widely used in petroleum, chemistry, refinery, paper making, pharmacy, power and auto industry.
Types of PTFE Wedge Mechanical Seals
Hangzhou Sealcon Fluid Machinery Co., Ltdis a professional wedges supplierfor PTFE Wedge mechanical seals to suit all the major china pump suppliers. PTFE wedge mechanical seals are multi-spring types with a PTFE wedge to locate the rotating face against the stationary face. They can also be supplied with an o ring to form a secondary seal on the shaft.
PTFE Wedge Mechanical Seals N11
Replacement for:
John Crane 109O Ring Mechanical Seals
AESSEAL M01
PTFE Wedge Mechanical Seals N12
Replacement for:
John Crane 109B Mechaical Seal
PTFE Wedge Mechanical Seals N15
Replacement for:
John Crane Type 59u PTFE Wedge Pump Seal
PTFE Wedge Mechanical Seals N16
Replacement for:
John Crane Mechanical Seal Type 59B
Features of PTFE Wedge Seals
Very typical PTFE wedge mechanical seals include John Crane 109, John Crane 109B, and John Crane 58U, 59U. Many times we can refer to these types of models as a reference, to have a further study about the PTFE wedge mechanical seal. As one of wedge gasket suppliers, we can take type 109 as an example. Type 109 is a Shaft-mounted Multi-spring Wedge Seal for use on corrosive applications, typically for chemical or hydrocarbon processing. The features of the John crane 109 mechanical seal is that the Shaft-mounted wedge seal, with PTFE or graphite-based wedges for corrosion resistance or high-temperature application. And the Parameters are as following shows:
TEMPERATURE LIMITS: -148°F to 932°F/-100°C to 500°CPRESSURE LIMITS: 24 bar(g)SPEED LIMITS: 25m/s
Application Field of PTFE Wedge Seals
From the above example, we can see that the PTFE TEFLONwedgeMechanical Seals are standards for use where expensive and corrosive liquids are being processed, especially for extremely corrosive fluid applications such as sulphuric, nitric, phosphoric or hydrochloric acids. Like most materials every choice has an up and a down side. Because PTFE will handle most chemical applications, chemical attack is no longer an issue. One the down side PTFE wedges can cause fretting of your sleeve or shaft if you have not hard surfaced your shaft or sleeve (plasma coating).
A PTFE wedge seal for general low- to medium-pressure duties in the chemical, refinery, petrochemical and pharmaceutical industries. Alternative seat designs and material options are available to suit product and operating conditions of applications. Typically applications of a corrosive nature, cryogenic and high temperature.The stationary element of your seal will require a PTFE gasket. But it's not much good to have a PTFE on the rotary and then use an elastomer on the seat. We have seen it done, and because it is a static application some have gotten away with it, but it is not recommended. Most commonly the seat will be a L-shaped or Clamped mount style to allow space for a PTFE gasket to be used as the secondary sealing element
Why Choose Sealcon's PTFE Wedge Seals
Sealcon has been offering PTFE Wedge Seals many years with emphasizing strict quality control, product reliability and product diversity. With the leading design and development capabilities, now Sealcon mechanical seals company widely cooperated with global customers and established close connection with many famous enterprises in fluid industry market.
Send product request
Other supplier products
 |
Different Types of Water Pump Seals | Elastomer Rubber Bellow Mechanical Seals Developed with rubber bellow, this type of seal is widely used for water, oil and other light duties appli... |
 |
Seal Spare Parts Sealing Rings | Seal Spare Parts Sealing Rings Brief Introduction of Sealing Rings The seal ring is a ring seal with the notch, it is placed in the ring groove o... |
 |
Flygt Mechanical Seals FOL-45 | Replacement for: FOL 45lower parts for flygt 3140, 3152 pump FOL-45 lower parts for flygt 4650, flygt 4660pump FOL-45 lower parts for flygt 2201... |
 |
PTFE Seal | Polytetrafluoroethylene (PTFE), also known as teflon/teflon or plastic king, is a copolymer of tetrafluoroethylene monomer. First, it was developed... |
 |
METAL BELLOW MECHANICAL SEALS | Metal bellow mechanical seals are ideal for high temperature applications and harsh chemical services where elastomers cannot be used effectively. ... |
Same products
 |
FKM RUBBER O RING | Seller: Xingtai Oubei rubber & Plastic products Co., LTD | FKM RUBBER O RING Benefits High Temperature Stability Capable of continuous operation up t... |
 |
Water Seal，Oil Seal | Seller: Xingtai Oubei rubber & Plastic products Co., LTD | Water Seal，Oil Seal If you're experiencing leaks in your Samsung or LG washing machine, the ... |
 |
Ec End Cap Covers Oil Seals | Seller: Xingtai Oubei rubber & Plastic products Co., LTD | Ec End Cap Covers Oil Seals Product use: mainly used in construction machinery, injection ... |
 |
o rings manufacturer | Seller: Xingtai Oubei rubber & Plastic products Co., LTD | o rings manufacturer O-RINGS & O-RING SETS At , we offer a comprehensive range of O-r... |
 |
auto oil seal | Seller: Xingtai Oubei rubber & Plastic products Co., LTD | auto oil seal At , we specialize in manufacturing and supplying auto oil seals that are en... |
