GATE VALVE SEAT
GATE VALVE SEAT
valve seat
Valve Seat: The detachable surface parts in valve are used to support the valve spool in the fully closed position and constitute a sealed part. Generally, valve seat diameter is the maximum flow diameter of the valve.
PRODUCT PARAMETERS FOR Stainless Steel Valve Seats
Valve Seat: The detachable surface parts in valve are used to support the valve spool in the fully closed position and constitute a sealed part. Generally, valve seat diameter is the maximum flow diameter of the valve. Elastic sealing material and small actuator's thrust force is used to obtain tight seal of air bubble, compression valve seat's sealing stress elastically deforms the material and squeezes it into the rough surface of the matching metal part to block all leakage paths. The permeability of material is a basis for small amount of leakage for fluid. The seal must be carefully fixed to prevent cracking and air leakage due to differential pressure. Bonding soft valve seat to metal part is one way, but it cannot completely solve the problem because the bond breaks and fails when exposed to thermal shock. A sufficiently large pressure drop will destroy the bonding material. Thermal spraying technologyultrasonic spraying equipment is used to optimize thermal spraying process so that the denseness of coating can meet the gas sealing requirements under up to 140MPa, the porosity of coating <1%, the bonding strength exceeds 75MPa, the hardness can reach HV1500 and the hardness uniformity fluctuates by no more than HV100; the product surface after coating can reach mirror surface, with roughness less than Ra0.1, and flatness no more than 2 bands, which can effectively reduce the coefficient of friction between Valve Gate and valve seat and improve its service life.
Send product request
Other supplier products
 |
VALVE GATE COATING INTRODUCTION | VALVE GATE COATINGINTRODUCTION tungsten carbide valve gate Valve Gate: The core parts of flat gate valves used in the petrochemical industry requir... |
 |
TUNGSTEN CARBIDEN VALVE SEAT | TUNGSTEN CARBIDEN VALVE SEAT Stainless steel Valve Seats Valve Seat: The detachable surface parts in valve are used to support the valve spool in t... |
 |
Tungsten carbide valve gate FAQ FOR CLIENTS | Stainless steel valve gates Valve Gate: The core parts of flat gate valves used in the petrochemical industry require high pressure, wear resistanc... |
 |
Common Gate Valve Coating Materiails | Common Gate Valve CoatingMateriails Valve Gate PRODUCT PARAMETERS FOR GATE OF GATE VALVE COATING This part can be illustrated by a table shown belo... |
 |
GATE AND THERMAL SPRAYING | GATE AND THERMAL SPRAYING Thermal Spraying Valve Gate Valve Gate: The core parts of flat gate valves used in the petrochemical industry require hig... |
Same products
 |
China Wholesale High Performance Butterfly Valve Supplier | Seller: Tianjin Tanggu TWT Valve Co., Ltd. | High Performance Butterfly Valve Definition A high performance butterfly valveis a type of valve... |
 |
China High Quality Ductile Iron Double Eccentric Butterfly Valve Pricelist | Seller: Tianjin Tanggu TWT Valve Co., Ltd. | Product Description Product Name ductile iron double eccentric butterfly valve ... |
 |
China Wholesale AWWA C509 Gate Valve Factory | Seller: Tianjin Tanggu TWT Valve Co., Ltd. | Product Description Product Name AWWA C509 gate valve Manual Manu... |
 |
Wholesale Resilient Seat Seal Groove Rising Stem Gate Valve Quotes | Seller: Tianjin Tanggu TWT Valve Co., Ltd. | Product Parameters Fluid medium Water, oil, gas, etc. Temperature Rang... |
 |
China OEM Steel Gate Valve Series For Sale | Seller: Tianjin Tanggu TWT Valve Co., Ltd. | Product Description As a China industrial valves manufacturer, TWT introduces Steel Gate Valve S... |
