.

COMMON Valve Seat Coating MATERIALS

COMMON Valve Seat Coating MATERIALS
  • COMMON Valve Seat Coating MATERIALS
Produced by: Suzhou Kaitianfu Machinery Co., Ltd

All supplier products
Send product request

COMMON Valve Seat CoatingMATERIALS

Valve Seat: The detachable surface parts in valve are used to support the valve spool in the fully closed position and constitute a sealed part. Generally, valve seat diameter is the maximum flow diameter of the valve.

PRODUCT PARAMETERS FOR OUR high performance valve seat

This part can be illustrated by a table shown below:

name

Description

Chemical composition

Max thickness

Hardness

Bond strength

Porosity

Limit temperature

Costing

characterlzation

mm

MPa

%

℃

WC-CoCr

WC86/Co10/Cr4

Co：9-11

Cr：3.5-4.5

C：3.5-4.5

W: Bal

1

1100-1500

>75

<1%

482
  • Good abrasive resistance at low temperature
  • Compared with WC-Co, its oxidation resistance

and corrosion resistance are improved.

  • The coating is compact and hard

WC-Co

WC88/Co12

Co：11-13

C：3.6-5.5

W：Bal

2

1050-1200

>75

<1%

454
  • Good abrasive resistance at low temperature.
  • Limited oxidation resistance and corrosion
  • The coating is compact and hard.

WC-Co

WC83/Co17

Co：16-18

C：4.8-5.5

W: Bal

2

950-1100

>75

<1%

454
  • Good abrasive resistance at low temperature.
  • Compared with WC-12Co, its abrasive resistance

is poor, but toughness, impact strength and ductility are better.

  • The coating is compact and hard.

Cr3C2-NiCr

75Cr3C2/25NiCr

Ni：16-21C：9-11

Cr：11

B：2.2

Si：4

Fe：2.7

C：0.4

Ni：Bal

1

750-900

>75

<1.5%

871
  • Good abrasive and sliding abrasive performance

of abrasive-resistant materials at high temperatures.

  • Good corrosion resistance.


Send product request

To: Suzhou Kaitianfu Machinery Co., Ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

TUNGSTEN CARBIDEN VALVE SEAT
 TUNGSTEN CARBIDEN VALVE SEAT TUNGSTEN CARBIDEN VALVE SEAT Stainless steel Valve Seats Valve Seat: The detachable surface parts in valve are used to support the valve spool in t...
Tungsten carbide valve gate FAQ FOR CLIENTS
 Tungsten carbide valve gate FAQ FOR CLIENTS Stainless steel valve gates Valve Gate: The core parts of flat gate valves used in the petrochemical industry require high pressure, wear resistanc...
Introduction to Hvof Tungsten Carbide Coating
 Introduction to Hvof Tungsten Carbide Coating Introduction to Hvof Tungsten Carbide Coating HVOF COATING Cemented Carbide Valve Seat Valve Seat: The detachable surface parts in valve are used t...
HIGH PERFORMANCE VALVE GATE DISPLAY
 HIGH PERFORMANCE VALVE GATE DISPLAY HIGH PERFORMANCE VALVE GATEDISPLAY Wear Resistance Valve Gate Valve Gate: The core parts of flat gate valves used in the petrochemical industry req...
Common Gate Valve Coating Materiails
 Common Gate Valve Coating Materiails Common Gate Valve CoatingMateriails Valve Gate PRODUCT PARAMETERS FOR GATE OF GATE VALVE COATING This part can be illustrated by a table shown belo...
All supplier products

Same products

Class 300 Valve
 Class 300 Valve Seller: GangYe Group Co.,Ltd. Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing...
Class 3000 Industrial Valve
 Class 3000 Industrial Valve Seller: GangYe Group Co.,Ltd. Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-...
Class 2500 Industrial Valve
 Class 2500 Industrial Valve Seller: GangYe Group Co.,Ltd. Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ...
Class 150 Valve
 Class 150 Valve Seller: GangYe Group Co.,Ltd. globe valve class 150is a pressure rating designation defined by standards organizations, such as...
Class 1500 Industrial Valve
 Class 1500 Industrial Valve Seller: GangYe Group Co.,Ltd. A class 1500 valve made of 316 stainless steel, for instance, can sustain 248 bar of pressure at ...