Float Control Valve 1025
Basic Information of Float Control Valve
Thisvalve controls the level of the water in the water tower or sink.
Features of Float Control Valve
- 2. Disc fast open and slowly closed, no water hammer impact;3. Good sealing effect and long service life;4. Install at any location along with the height of the water tank and the working space.
Principle of Float Control ValveWhen the pipe supplies water from the inlet end, because the needlevalve, ball valve and float ball valve are normally open, water enters the water tank through the micro-filter, needle valve, control room, ball valve and float ball valve. At this time, there is no pressure in the control room; When the water level of the water tower rises to the set height, the ball float closes the ballfloat valve, controls the indoor water pressure rise, pushes the main valve to close and the water supply to stop. When the water level drops, thefloat controlled water valvereopens, the water pressure in the control room drops, and the main valve opens again to continue the water supply, keeping the setting height of the liquid level.
Installation and Commissioning of Float Control Valve
Horizontal installation is preferred for remote-controlled ball floatvalve. The main valve and ball float pilotvalvecan be remotely installed as a whole. This valve is installed in the water system and debugged. The globe valve is opened. The main valve needle valve is opened for 2 to 4 rounds. The ballvalveis fully opened. For specific use, please consult ZECO Valve Group.
Product scope, Standards & Materials of Float Control ValveSize Range: 2"~24"Pressure Rating: 10bar ~ 25barFace to Face Dimensions: AMSE B16.10, EN558-1Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2Coating: Fusion Bonded Epoxy CoatingInspection and Test: ISO 5208 / EN 12226-2
Zhengfengis one of the most professional control valve manufacturersin china in China. And we sincerely invite and welcome people from all around the world to invest and create more values together.
Send product request
Other supplier products
 |
Bronze Flow Balancing Valve | Basic information Venturi flowmeter is adopted in the body of a balanced valve with threaded connections to make flow adjustment more accurate and ... |
 |
Wafer Check Valve | What is a Wafer Check Valve? Wafer check valves are in-line piping valves used to control fluid flow direction and reduce or fully prevent possibl... |
 |
2.5 Inch Valve 1025 | Most of the 2.5 inch butterfly valveused in the walkway begin to be made of ductile cast iron, as copper or stainless steel becomes much more expen... |
 |
Backflow Preventers | The problem of contaminated water due to backflow is emerging, and the health hazards caused by contaminated water are also alarming to engineers a... |
 |
Pressure Relief(Sustaining) Valve | Basic informationThis sustaining valveis opened to prevent the pipeline and equipment from being damaged due to overpressure when the pressure in t... |
Same products
 |
Dry Ash Gate Valve | Seller: China Valve Industry Co., Ltd. | The dry ash gate valve is designed for both inlet and outlet pipelines. It features... |
 |
China factory High temperature double head bolt 2""-8UN Steam Turbine RSV N for power station | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China factory High temperature double head bolt 2""-8UN Steam Turbine RSV N for power stationOur... |
 |
Male Thread Nickel Plated Brass Butterfly Ball Valve | Seller: Zhejiang Huibo Valve Technology Co., Ltd. | Male Thread Nickel Plated Brass Butterfly Ball Valve Material: Brass Body, Brass Bonnet, brass ba... |
 |
4800030000 For daewoo,evobus,mercedes-benz,paccar foot brake valve | Seller: Zhuji Oubote Auto Parts Co., Ltd. | 4800030000 foot brake valve are attached to the brake pedal. This isthe valve that actually start... |
 |
Aluminum Gas Valve | Seller: Dong Guan ABYDA Gas Valve Co., Ltd | Product Specification:1. Raw Material: Al Alloy + solid brass + Mild steel;2. Applicable for LPG,... |
