Pressure Reducing Valve
Festures of pressure reducing valves for fire protection service
Sensitive and accurate pressure control
Adjustable static pressure and dynamic pressure
Outlet pressure does not fluctuate with inlet pressure
Full port, small fluid resistance
Fire Pressure Reducing ValveWorking Principle
When water flows through the check valve, water flows into the main valve control chamber through the needle valve, and the outlet pressure is imposed on the pilot valve through the guide duct. When outlet pressure is higher than the set pressure of the pilot valve, the outlet pressure does not rise any more; when the outlet pressure of the valve reduces to the set pressure of the pilot valve, the pilot valve opens, water is discharged out of the control chamber. Because the water discharged from the pilot valve system is more than the water inflow, the pressure in main valve control chamber reduces. The inlet pressure forces the main valve open. In a stable state, the water inflow and discharged water of the control chamber are equal. The opening of the main valve keeps constant, with stable outlet pressure.
Pressure Reducing Valve Installation and Commissioning
For operation, adjustment and maintenance convenience, the pressure reducing valve is typically installed on a horizontal pipe along with a backup pressure reducing valve group. Every grade of spring of the pressure reducing valve ;can only apply in a certain range of outlet pressure, and outlet pressure can be set only by adjusting the spring of pilot valve. For specific use, please consult ZECOValve Group.
Pressure Reducing Valve Material and Standard
Size Range: 2"~24"
Pressure Rating: 10bar ~ 25bar
Face to Face Dimensions: AMSE B16.10, EN558-1
Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2
Coating: Fusion Bonded Epoxy Coating
Inspection and Test: ISO 5208 / EN 12226-2
As a pilot operated pressure reducing valve manufacturer, we have types of pressure reducing valve for sale, and the cost of prv valveis affordable, if you want to buy water pressure reducing valve, please contact us.
Send product request
Other supplier products
 |
Wafer Check Valve | The double plateChina wafer check valveis used for the pure pipeline, industry, environmental protection, water treatment, high-rise building water... |
 |
Combined Butterfly-Check Valve | Basic informationThis valve acts as a closed circuit valve and a check valve to protect the system by avoiding and reducing the backflow of the int... |
 |
Big Size Resilient Gate Valve | ZECO is one of the leading check valve manufacturers china, China. ZECO check valveprovides non-slam closure, have a low head loss and close drip-t... |
 |
Wedge Gate Valve | Description Wedge gate valve is a linear motion, multi-turn general service valve. Table of Contents Gate valve Types as per Type of Closing E... |
 |
Adjustable Dynamic Flow Balancing Valve | Basic information Adjustable dynamic flow balancingvalve can manually adjust the set flow rate in the pipeline, and also can automatically maintain... |
Same products
 |
Клапан | Seller: RongTengXinNuo(Tianjin) International Trade Co.,Ltd | Клапан |
 |
Class 300 Valve | Seller: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... |
 |
Class 3000 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... |
 |
Class 2500 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... |
 |
Class 150 Valve | Seller: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... |
